backplane的例句大全

Percentage of revenue from backplane production.

背板产品在营业收入中的比例?

An area on a module that is a physical and electrical part of the backplane wiring.

插件板上一小块区域,它是母板连线的一部份.

A thin round section of metal on the backplane on which wires are wrapped.

底板上用于连接导线的一段金属细针.

A multiprocessor backplane bus contains a separate Internet network.

一个多处理器的主板总线包含一个独立的内部网络.

The backplane anchor address is established by configuration constants or by boot parameters.

主板锚的地址可以通过配置宏或者启动参数确定下来.

Conditioning backplane , so that leakage from the hole at the bottom of the pump.

调治背板, 使漏液排出孔位于泵的最底端.

Conditioning backplane so that leakage from the hole at bottom of the pump.

调节背板,使漏液排出孔位于泵的最底端.

This bridge is the core of communication of the controller system, it connects the bottom level backplane bus, backplane bus controller, and PC EPP parallel port.

该总线桥是某型协调控制器系统的通讯核心，实现了系统下层的背板总线、背板总线管理器与上位机EPP并口之间的协议转换以及通讯仲裁功能。

A design of high speed backplane bus based on GTL technique

基于GTL技术的高速背板总线设计

Application of Combined Termination in High Speed Backplane Bus

高速背板总线的组合式匹配方法

It can greatly reduce the harm of overshoot and ringing in high speed backplane bus, and observably improve the signal integrity in high speed bus.

它能有效地削弱高速总线中上冲和振铃对信号完整性的不利影响，有效地提高总线信号的完整性，从而提高总线速度。

Based on analyzing the source of overshoot and ringing in high speed backplane bus with general termination, a innovative method of termination& combined termination is recommended.

分析了高速背板总线中传统匹配情况下产生上冲和振铃的原因，指出在高速背板总线设计中的一种创新性的匹配方式&组合式匹配的合理性。

The control board uses USB to communicate with PC and communicates with other electronics modules through a custom backplane bus, completing controlling function of the electronics section.

控制板和上位机PC之间采用USB通信方式，并通过自定义的背板总线同其他电子学模块通信，完成对电子学部分的控制。

The problems of backplane bus design, such as the driver, timing and signal integrate, have solved by using the GTL transceivers, phase adjustment of the clock and combined match techniques.

采用新型的GTL总线收发器、时钟相位调节和组合式匹配等技术措施，解决了总线设计的驱动、时序和信号完整性问题。

While high-speed serial port broke I/ O bottleneck to provide necessary bandwidth and expansion capability, it is an important technique used in high backplane interconnection and also reduces the cost of entire system.

本文采用高速串行接口技术可以突破I/O瓶颈，提高需要的带宽和增强扩展能力，降低总体系统成本，是高速通信设备中的重要的背板互连技术。

The aluminum alloy backplane is provided with an expansion bend formed through mechanical pre-processing so as to absorb heat expansion;

铝合金背板上有预先经机械加工形成的膨胀弯，以吸收热膨胀；