based的例句大全

Based on the three-layer neural network with single output, we derive a new weight updating rule for applying TD(λ) in CCCG.

基于单输出的神经网络，通过将TD（λ）算法引入到中国象棋计算机博弈中，我们推导出了套新的神经网络权值更新规则。

The code restriction technique and clipping are combined to achieve higher PAPR reduction and better BER, which can be seen from the simulation results of CCDF and BER based on MATLAB.

基于MATLAB的互补累积分布函数和误码率的仿真结果表明，码元约束技术和传统限幅的结合不仅降低了高峰均功率比，而且很好地改善了误码率性能。

Multicarrier modulation system based on wavelet packet transform is introduced. By analyzing the CCDF about peek value's power, its efficiency on measuring the performance of PAPR is demonstrated.

介绍了以小波包函数为载波的多载波调制系统，分析了WPM信号符号周期内峰值功率的互补累积分布函数（CCDF）及其对PAPR性能的有效描述；

Research on the component description model, analyzed the informal and formal description of component, gave an XML based configurable component description model ( CCDM)

构件表示模型的研究，对构件的非形式化表示和形式化表示进行了分析和研究，提出了一种基于XML的可配置的构件表示模型CCDM（Configurable Component Description Model）；

Based on the craft characteristic of CCDP and the technics of expert system and soft-sensing, two kinds of flow controls are proposed which named as sample control and stabilize control of first-tack. The flow hybrid control model of the first-tack is designed in this paper.

基于连续碳酸化分解过程工艺特点，结合专家系统方法和软测量技术，提出了首槽进料量的报样控制和稳定控制，设计了首槽进料量混合控制模型；

The main research work is as follows: 1. On the basis of the experiential knowledge and the mechanic characteristics of CCDP, the real-time monitor of CCDP is developed which is based on expert systems, to realize the real-time safe monitoring.

结合连续碳酸化分解过程的机理特征和经验知识，设计了基于专家系统的分解过程实时安全监控器，实现分解过程实时安全监控；

Design of high resolution camera system based on full frame CCDs

高分辨率全帧CCD相机电路系统的设计

Firstly, based on Cooperative Co-Evolutionary Algorithm ( CCEA) framework, decomposed the problem to reduce the difficulty in solving it.

首先，基于协同进化框架，采用分而治之的策略对问题进行分解，降低问题的求解难度。

In the design of neural network, a novel method based on the cooperative coevolutionary and the immune algorithm ( CCIM) is proposed. The CCIM is used to evolve the structure and parameters of neural network.

在神经网络的设计中，根据协同进化和免疫算法原理，提出了协同进化免疫算法，对神经网络的结构和参数同时进行学习，形成了一种新型的神经网络学习算法。

According to these, we finally establish mathematical models of HVS noise threshold and IQS based on CCIR five-point quality scale.

在此基础上，建立了基于CCIR五级质量标准的HVS噪声阈值数学模型和IQS数学模型。

With SOA, CCMS is a flexible and adaptable solution, based on reuse.

通过使用SOA，CCMS成为了基于重用的灵活而适应性强的解决方案。

Based on CCPI work principle, network topology framework and concurrency control model of the system are constructed, concurrent conflict detection and control flow is presented as well.

基于客户协同产品创新设计工作原理，构建了创新系统网络拓扑结构框架及创新系统并发控制模型，提出了并发冲突检测与控制流程。

Further, conflict resolution process model of CCPI is established and hierarchical knowledge matching-based conflict resolution flow is presented.

在此基础上，建立了协同设计中冲突消解过程模型，并给出了基于层次知识匹配的协同设计冲突消解流程。

To Study on Managing Method of Projects Cluster Based on Integrating CCPM with the V Model

基于CCPM及V模型结合的项目群管理方法研究

Compilation and Research of Underground Mine Construction Plan Based on CCPM

基于关键链的矿井建设计划的编制与研究

The generalized S-parameter matrices of rectangular inductive irises are calculated based on a rigorous mixed method of the Mode Matching Method and the Conservation of the Complex Power Technique ( CCPT).

利用模式匹配的基本思想，结合复功率守恒法，考虑膜片厚度，推导出了矩形波导感性膜片不连续性的广义散射参数矩阵公式。

Based on the results of one-factor-at-a-time ( OFAT) experiment, central composite rotatable design ( CCRD) according to the principles of response surface methodology ( RSM) was carried out to optimize the enzymatic hydrolysis process.

在单因子实验的基础上，利用响应曲面法中的旋转中心组合设计对水解工艺进行了优化。

A Microcomputer-Based Test System for CCSS No. 7 Level 2

基于微型计算机的CCSS No.7第二功能级测试系统

Channel-correlation-based selection ( CCUS) algorithm is proposed in this dissertation. The proposed algorithm is carefully designed to decrease the multiple access interference and improve the coding gain at the base station and relay.

提出了基于信道相关性的用户调度（CCUS，Channel-Correlation-Based Selection）算法，通过选择用户与中继之间的信道冲激响应，减小用户之间的多址接入干扰，并提高基站和中继的预编码增益。

This method, is based on the hybrid matrix equation of the linear m-port network with controlled sources. It can be used for the circuits containing VCVS and CCVS.

该方法是以含有受控源的线性m端口网络的混合矩阵方程为依据的，它能分析包括VCVS和CCVS器件的电路。