beam的例句大全

TA 15 titanium alloy T joint obtained by EBW ( electron beam welding )-brazing hybrid welding was investigated.

实现了 TA15 钛合金T形接头的电子束焊 — 钎焊复合焊接.

The ultrasonic C-scan testing method is used in detecting electron beam welding ( EBW ) seam.

采用超声C扫描技术检测结构件的 电子束 焊焊缝.

The size of beam spot of EBW is important factor which affects weld configuration.

电子束焊接焦点的大小是影响焊缝成型的重要因素.

Filter back projection ( FBP ) reconstruction algorithm is adopted by fan beam industrial CT systems.

扇束工业CT系统普遍采用滤波反投影 ( FBP ) 重构算法.

However , this algorithm does not apply for circular orbit cone-beam scan with line ray source.

为此,将上述点源FDK近似原理拓展到线源情况,推导了线源圆轨道锥束扫描3D-CT重建算法.

However , this algorithm does not apply for circular orbit cone-beam scan with line -- ray source.

为此,将上述点源 FDK 近似原理拓展到线源情况,推导了线源圆轨道锥束-CT重建算法.

This article introduces the overhaul of the malfunction of no beam by GE LCV vein machine.

重点介绍血管机不出束故障的检修过程,供同类故障的分析及检修参考.

This article introduces the overhaul of the malfunction of no beam by GE LCV vein machine.

重点介绍血管机不出束故障的检修过程,供同类故障的分析及检修参考.

Influence of the multi-beam characteristic on performance of MBK has been researched.

初步研究了多电子注特性对多注速调管性能影响.

A 500 μ m ×500 μ m micro-mirror structure actuated by PZT piezoelectric cantilever beam was designed.

设计了一种采用锆钛酸铅(PZT) 压电薄膜悬臂梁作为驱动机理的500μm×500μm微镜结构.

Core Hole at R . C . Beam for installation of pipes.

直梁上钻孔以便管道安装.

Fatigue Test of Tensile Anchor Plates in Cable-Beam Anchorage Zones for Zhanjiang Gulf Bridge

湛江海湾大桥锚拉板式索梁锚固区疲劳试验

The result shows that the fring effect of magnetic field is obvious, and the nonlinear property of beam dynamics can be neglected in the smaller radial region.

结果表明，在加速器的小半径区域，束流动力学表现出了明显的边缘场效应和相当程度的非线性特征。

Fring Field Effect and Beam Dynamics Property on Radial Sector Cyclotron

径向扇回旋加速器的边缘场效应和束流的动力学特征

Based on field measuring, a temperature field and temperature gradient curve of steel flat box beam are presented. In this temperature gradient curve, the sunshine temperature difference between roof and floor is high to 30 ℃.

结合大量现场试验，提出了符合工程实际的日照温差下带人行道翼缘的扁平钢箱梁温度梯度模式和竖向及横向的温度梯度曲线公式，其顶底板日照温差可达30℃。

Comparison of Several Methods for Digital Beam Null Forming

几种数字波束零点形成方法的比较

Analysis on Size of Padding Block Under Beam End and on Pilastered Brick Wall

带壁柱砖墙上大梁垫块尺寸分析

The formation and microstructure of intermetallic surfacing layers acquired by light beam heating Ni and Al mixed powder were investigated by means of X-ray diffraction, SEM, EDXS and microhardness.

采用X射线衍射、SEM、EDXS及显微硬度等方法，研究了光束堆焊Ni，Al混合粉末制备的金属间化合物涂层的成形和微观组织特征。

Experimental study on ECRH trapped electron beam injected into the simple mirror

电子束注入简单磁镜中被电子回旋共振加热捕获的实验研究

DY2001A Electron Beam Lithography System ( EBLS) is developed as a practical miniature EBLS.

DY2001A型电子束曝光机是作为实用化的小型曝光系统而研制的。