buckling的例句大全

Presently, the study did for it just directly used the results of study buckling behaviors on drilling pipe, casing string, conventional oil tubing to deal with coiled tubing;

目前对它的研究只是将钻柱、套管柱和常规油管柱屈曲问题的研究结果直接用于连续油管，现场很多实例表明，这样做的偏差很大，连续油管因为残余应变而具有独特的井下屈曲行为。

Studies of the Hydraulic Pressure Tubing Disposition Tactic and its Software Application. ANALYSIS OF POST-BUCKLING OF LATERALLY CONSTRAINED LONG WEIGHTLESS TUBING SUBJECT TO AXIAL AND TORSIONAL LOADS

液压管道布置策略的研究及其软件实现受横向约束的细长无重管柱在压扭组合作用下的后屈曲分析

By the investigation of instantaneous critic loads and durable critic loads, the mechanism of creep buckling of boron fiber/ epoxy matrix laminated plates and boron fiber/ epoxy matrix cylindrical shells exhibiting viscoelastic behavior is revealed.

通过对瞬时临界荷载与持久临界荷载的分析，以硼纤维环氧树脂基复合材料为例，揭示了粘弹性层合板和层合圆柱壳在蠕变荷载下的延迟失稳机制。

Plastic buckling of cylindrical shells under biaxial load

双轴载荷作用下柱壳的塑性屈曲

However, local buckling is more likely to occur for thin-walled tubes, and thus decreases the lateral confinement on the concrete core.

但薄壁钢管在荷载较大时易发生局部屈曲，且降低对混凝土的约束。

A new mechanical method, random displacement method, was used to analyse static buckling of frame structure.

将一种新的力学分析方法 —— 随机位移法应用到刚架稳定问题的求解,以拓展其应用范围.

Study of Dual Conical Bearing and Its Application in Hydro-Electrical Servo Actuator Buckling capacity optimization of cylindrical shell with rectangle stiffeners under uniform axial compression

双圆锥静压支承应用在电液伺服作动器中的研究矩形加筋圆柱壳轴压屈曲承载力优化

Finite Element Based Coupled Mode Initial Post-Buckling Analysis of a Composite Cylindrical Shell

基于耦合模式下初始后屈曲分析的复合柱形壳的有限元分析

By many years experiences, controlling ballast resistance and excessive compressive temperature force of the rail is recognized as the only means to overcome the track buckling.

多年来认为控制道床阻力及钢轨内的温度力是防止胀轨跑道的主要办法。

Elastic shear buckling of web plates in tapered I-girders

楔形工字梁腹板的弹性剪切屈曲分析

Investigation into Elasto-Plastic Buckling Strength of Web with Longitudinal Stiffener in I-Section Girder

纵向加劲肋对钢梁腹板弹塑性屈曲承载能力影响的研究

With the restraint of flange to web considered, the buckling stress of steel beam web under different stress is analyzed. The condition for instating web stiffener is given.

考虑翼缘对腹板的约束作用分析处于不同状态下钢梁腹板的临界应力，得出腹板加劲肋的设置条件激励与约束的关系；

As one of several strength-governing modes, distortional buckling is receiving more attentions.

作为控制冷弯薄壁型钢承载能力的几种屈曲模式之一, 畸变屈曲正逐步受到重视.

In this paper, the elastic buckling influence coefficient yae is computed by the theorem of elasticity, while the plastic buckling influence coefficient γ ap is calculated from test data. NONLINEAR ELASTIC BUCKLING OF CYLINDRICAL COMPOSITE PANELS UNDER AXIAL LOAD

本文依据弹性理论得出柱弹性弯曲影响系数γα（？）复合材料圆柱曲板在轴压下的非线性弹性稳定问题

The analysis on nonlinear buckling of double-deck hyperbolic parabolic reticulated shell under the uniform pressure.

双层 双曲抛物面网壳结构在均布压力作用下的非线性屈曲分析.

The DQE Method for Analyzing the Nonlinear Buckling of Tubular Under Radial Constraints

受径向约束管柱非线性屈曲的DQE法

They verify the applicability of the interaction formula for lateral-torsional buckling of beam-columns adopted in the Specification for Design of Cold-Formed Thin-wall Steel Structures ( GBJ 18-87).

试验验证了《冷弯薄壁型钢结构技术规范》（GBJ18&87）中压弯构件弯扭稳定性相关公式的适用性。

The effects on buckling stress of the changes of the stiffener rigidity, shape, dimension and location, as well as the required adequate stiffening rigidity of flat-hat stiffened plates are put to analysis in details in the paper.

文中详细分析了帽形肋条的刚度、形状尺寸和位置变化对中间加劲板件屈曲应力的影响，以及帽形中间加劲板件的充分加劲刚度的计算。

A program finite strip analysis model is formed and finite strip computer software is also made in this paper. The buckling behaviors of plates with flat-hat intermediate stiffener are analyzed by employing finite strip method.

论文建立了有限条法分析模型，编制了有限条计算程序，用有限条法分析了帽形中间加劲板件的屈曲和帽形肋条的加劲性能。

Then the ply angle effect of composite face sheet on buckling was discussed. The result getting from this paper was compared with the result getting from the conventional modeling method.

最后讨论了当夹层板面板为复合材料时，铺层角度对屈曲载荷的影响，并与常规建模方式进行了对比。