camber的例句大全

A taper has two sides, the underside is a circle, the flank is a camber.

结论:圆锥有两个面, 底面是一个圆形, 侧面是一个曲面.

The front subframe is modified for extra camber and castor.

前副车架被修改为额外拱形和蓖麻.

This provides an increased damping rate and allows a slight reduction in camber angle.

这样就增加了减震度,并且可以稍微减少外倾角.

Application of low Mooney viscosity, non pollution type NBR to thin camber sponge rubber was studied.

研究低门尼粘度 、 非污染型丁腈橡胶在薄型曲面海绵胶料中的应用.

Ultra low chassis measurement. Camber-lifting for adjustment. Electronic leveling function.

超低底盘检测, 外倾角升起调整, 电子水平功能.

The Camber in a High speed Corrugating Roll Mechanism and Its Dynamic Deflection Equation

高速瓦楞辊机构的中高度及其动挠度曲线方程

A Finite Element Method of Camber Parameter Synthesis of the High-speed Corrugating Roll Mechanism

高速瓦楞辊机构凸度参数综合的有限元法

The successful control of the arch axis proves that invariable cable method is effective in hoisting CFST arch ribs into arch bridge with proper camber.

大跨度拱桥施工可以采用的一种方法是悬臂浇注，它采用挂篮施工，并张拉扣索对裸拱线形控制。

A Study of the Rigidity and Arch Camber of the Main Beam of Gantry Cranes

门、桥式起重机主梁刚度与拱度研究

How to reduce bigger arch camber of inherent stress box-beam

如何减少预应力箱梁起拱偏大问题

The measures against coal arch camber in planomural coal bin and coal drop pipe are proposed by analyzing practical cases.

通过实例分析，提出了解决煤仓及落煤管落煤起拱的措施。

First of all, in the stage of design, the value of arch camber should be specified.

首先在设计阶段，应该对起拱值进行具体要求。

CAD for The Working Camber of Dividing Cam with Arcuate Surface

弧面分度凸轮工作曲面的CAD

For straight-winged tailless airplanes, only the negative camber satisfies the conditions for flight.

对直机翼无尾飞机, 只有负弯度才满足飞行条件.

Camber line becomes orthogonal arc tooth wimble gear.

中心线成直角的弧齿锥齿轮.

Synopsis There are some factors that cause the formation hot strip side-camber in the rolling process.

板带轧制过程中因受某些因素影响会形成侧弯.

A blended wing-body, variable camber wings, and forebody strakes provided extra lift and control.

翼身融合, 变曲率机翼, 还有前机身边条翼提供了额外的升力和控制性能.

Compared with even die drawing, camber die-drawing's limit drawing coefficient is detracted, so efficiency is increased.

曲面凹模拉深与平端面凹模拉深相比, 降低了极限拉深系数,减少工序 、 提高了效率,降低了成本.

The main, sub-beam handover, the first main beam arch camber, arch camber beam after the meeting.

主 、 次梁交接时, 先主梁起拱, 后次梁起拱.