carbide的例句大全

New Development of Functionally Gradient Cemented Carbide and Cermet

功能梯度硬质合金和金属陶瓷材料研究的新进展

In this paper, the recent developments of gradient cemented carbide and cermet are reviewed, with emphasis on their manufacturing processing, properties, and typical applications.

综述了国内外梯度硬质合金和金属陶瓷材料研究的进展情况，重点介绍了其粉末冶金制造方法、性能特征和典型应用开发。

Tungsten carbide/ cobalt cermet coatings deposited by thermal spraying have been widely used in various areas to enhance the wear resistance of many types of engineering components.

热喷涂传统碳化钨/钴金属陶瓷作为耐磨涂层已得到广泛的应用。

Detection on Inhomogeneity of Eutectic Carbide of Rolled D2 Die Steel

D2模具钢轧材碳化物均匀性的检测与分析

Gradient silicon carbide coatings were prepared on the surface of C/ C composites by chemical vapor reaction ( CVR). Formation mechanism and oxidation resistance property of the coating were discussed.

本文采用化学气相反应法（CVR）制备了C/C复合材料的梯度SiC涂层，对该梯度涂层的形成机理及抗氧化性能进行了试验研究。

The study of calcium carbide dust improving salty soil

电石灰改良盐渍土的研究

The results show that the microstructure of the steel obtained after cooling is proeutectoid ferrite, eutectoid ferrite from the austenite, a little carbide-free bainite, granular bainite and martensite.

结果表明，该钢在冷却过程中组织均为未溶的先共析铁素体、从奥氏体中析出的共析铁素体、少量的无碳化物贝氏体、粒状贝氏体和马氏体。

These fine carbide particles grew during isothermal before the eutectoid transformation and their sizes depended on isothermal time and temperature;

这些弥散分布的碳化物颗粒在共析转变前的等温过程中长大，其尺寸由等温时间和等温温度控制。

An introduction on Union Carbide Corporation Different spheroidizing technologies were applied to the hot-rolling ultra-high carbon steel by DET ( divorced eutectoid transformation).

联合碳化物公司利用离异共析原理，采用不同的热处理工艺球化热轧超高碳钢。

ZrC layers are used instead of silicon carbide ( SiC) layers for fabricating a new type of coated fuel particle for the high temperature gas cooled reactor ( HTGR).

为了进一步发展和开发利用高温气冷堆，用碳化锆镀层替代碳化硅镀层制备新型的包覆燃料颗粒。

Based on the ERP executing of ZCC carbide mixture, the article discussed the process management factors of ERP executing.

以株洲硬质合金集团有限公司混合料ERP项目实施过程管理为基础，探讨ERP系统实施过程管理要素。

E pure carbon as the standard sample and helped by the ZAF correction method, it is also applicable to the carbon content analysis of the carbide phases in high alloy steel.

用纯碳作标样，再以ZAF法修正计算，可用于高合金钢的碳化物相的碳量分析。

Research on Possibility for Calcium Carbide and Fly Ash Used as LFS

电石灰、粉煤灰做二灰土的可能性试验研究

Gas chromatographic determination for the gas content of hydrogenium, carbon monoxide, carbon dioxide, methane, and ethyne in the gas from the calcium carbide furnace

气相色谱法测定电石炉气中氢气、一氧化碳、二氧化碳、甲烷、乙炔气体含量

The cost of ethyne from natural gas is compared with that of ethyne from calcium carbide in this paper. The research of acrylic acid and 1,4-butanediol series products synthesized by ethyne is the emphasis of this paper.

文中着重阐述了国内天然气制乙炔与电石法乙炔生产成本比较，重点还介绍了乙炔羰基合成丙烯酸、1,4-丁二醇系列产品的研究进展。

The applications of mold flow of computer simulation in MIM of cemented carbide

充模流动计算机模拟在硬质合金MIM中的应用

The element analytical model was established for carbide anvil of artificial diamond BELT synthetic device.

建立了人造金刚石BELT合成装置硬质合金顶锤的有限元分析模型.

The finite element analytical model was established for carbide anvil of artificial diamond BELT synthetic device.

摘要建立了人造金刚石BELT合成装置硬质合金顶锤的有限元分析模型.

Titanium carbide, titanium nitride and titanium carbonitride have an extensive application in mechanism, chemical and microelectronic industry for they have a series of excellent properties such as high melting point, big hardness, good chemical and thermal stability.

TiC、TiN和Ti（C，N）系列含钛化合物具有熔点高、硬度大、化学和热稳定性好等一系列优异的性能，在机械、化工、微电子等领域有着广泛的应用前景。

G silicon carbide waterproof abrasive paper were made within the-15 °-55 ° of reflectance zenith angle.

G防水研磨金刚砂在反射天顶角-15°～55°范围进行了测试研究。