composite的例句大全

Via the indoors model tests simulating the realistic projects, the cores of the tests are exact emersion of the process of making piles and the environments of the WJP composite foundation.

论文的开展基于模拟工程现场实际的基础上而进行的室内模型湿喷桩复合地基试验。

With increasing temperature, the strength of the Cu/ WCp composite decreased.

随着温度的升高，不同体积分数的Cu/WCp复合材料的强度明显下降。

Design Exploration of treating soft soil foundation of large scale storage tank wih composite foundation

组合型复合地基处理大型储罐软土地基的设计探讨

The change of conductivity and hardness of WCu composite after deformation has been investigated. The results show that the hardness is increased greatly, however, the conductivity is decreased.

本文还对钨铜材料的导电率、硬度的变化进行了研究，结果表明，二次挤压后的钨铜材料的硬度有明显提高，而导电性能反而有所下降。

Influence of Heat Treatment on Lubricated Frictional Wear Properties of In-situ VCp/ Fe Composite

热处理对原位自生VCp/Fe复合材料的油润滑摩擦磨损性能影响的研究

Studies on TZP Ceramics Mould by Nanometer Powder Composite

纳米复合TZP陶瓷模具的研制

Primary endpoint was a composite of cardiac death, non-fatal myocardial infarction ( MI), stroke or target vessel revascularization ( TVR) at1 year.

主要终点包括随访1年时的心源性死亡、非致死性心肌梗死（MI）、卒中或靶血管血运重建（TVR）。

Stability Analysis of Composite Laminates THE TECHNOLOGY OF MULTIPLE LAYER METALLIZING FOR SBD

复合材料层合板的稳定性分析肖特基二极管多层金属化技术

Preparation and Fluorescence Property of Metal-organic Framework Composite RhB/ MOF-5

金属有机骨架复合材料RhB/MOF-5的制备及其发光性质

Bandgap and Damping Property Analysis of Two-dimensional Periodic Composite Structure Based on PWE

基于PWE的二维周期性复合材料带阻特性研究

Construction technique for QTc composite block material and its application

QTC复合砌块的施工技术与应用

According to the test results, the temperature difference between steel and concrete can be taken as 15 ℃ in the design of composite bridges of QTR.

根据测试结果，青藏铁路结合梁设计中钢与混凝土温差可按15℃取值。

Electrochemical preparation of PPY/ PSF composite films and its electrochemical properties

聚吡咯/聚砜复合膜的电化学制备及其电化学性能

Preparation of PPy/ CNTs Composite Based on the Electrostatic Absorption Effect

基于静电吸附作用制备PPy/CNTs复合材料

It is pointed out that the conventional fabrication, when combined with explosion welding, will prove to be a new and important approach to the production of composite metallic materials in various shapes and sizes and with different properties and applications.

指出，爆炸焊接和传统的压力加工的联合，是生产各种形状、尺寸、性能和用途的金属复合材料的一条新的和重要的途径。

Explosion welding and fibre strengthened composite material

爆炸焊接纤维增强复合材料

Conclusion The three types of PLV preparation all can obtain the ideal appearance and color, if the cases selected reasonably, the tooth prepared enough and high strength composite systems are used.

【结论】合理选择适应证、足够的牙体制备及高强度树脂粘结系统，可保证3种牙体预备类型均能使PLV获得良好的外形、满意的颜色及可靠的临床近期粘接强度；

Study on property of TiO_2/ ZrO_2 composite ceramic film

TiO2/ZrO2复合陶瓷膜的性能研究

A new steel-concrete composite structure was proposed which composed of steel box beam, PC beam and PBH Shear connection.

提出了一种新型钢砼组合结构&钢箱砼组合受弯构件，该构件由钢箱梁，钢筋混凝土梁及PBH剪力连接件组合。

When the content of PFW in Kevlar fabric composite is 20%, the Kevlar fabric composites can obtain the best friction-reducing and anti-wear properties.

当PFW质量分数为20%时，Kevlar纤维织物复合材料的摩擦系数减小75%、磨损率降低82%，Kevlar纤维织物复合材料的减摩抗磨性能最佳。