cooling的例句大全

The RFM-S capacitor comprises the core, enclosure, cooling water tube and connecting terminal supported by sheath.

型电容器由芯子、外壳、冷却水管和由套管支撑的接线端子构成。

It is concluded through analysis that the combustion chamber contraction cavity of the thick-top piston is mainly caused by the defect of the mould and the inefficiency of the water-cooling system.

经过分析得出结论：造成厚大项部活塞毛坯燃烧室缩孔问题的主要原因是由于模具本身的弊端和水冷系统效果不佳。

Boundary surfaces were simultaneously exposed to both radiative heating and convective cooling.

外界辐射加热与对流冷却同时作用于边界表面。

The cedar-clad skin is perforated to allow convective cooling of the interior.

如雪松一样的建筑表层设计成穿孔，有利于室内对流的空气冷却。

The heat emission in the free room of a plasma ladle furnace and the forced convective cooling in a plasma torch has been studied, and a physico-mathematical model of heat transfer for the plasma ladle furnace has been established.

研究了等离子体钢包炉内自由空间辐射传热和等离子枪水冷强制对流传热，建立了等离子体钢包炉传热数学模型。

Calculation of Wall Temperatures of Afterburners with Convective and Film Cooling

复合冷却加力燃烧室壁温计算

Study on performance of convective heat transfer for cooling oil in small-sized totally-closed compressor

小型全封闭压缩机冷却油的对流换热特性研究

Metrology is to ensure the value accurate and consistent. The flow metrology is one components of the metrology science, coolant is mainly used for the cooling of airborne electronic equipment and fire control radar, numerous coolant flow meter need to be calibrated.

计量的目的是保证量值的准确一致，流量计量是计量科学技术的组成部分之一。冷却液主要用于机载电子设备、火控雷达的冷却，大量冷却液流量仪表需要校准。

This paper presents the inner cooling theory that use the high insulating property and low boiling point materials instead of water as coolant in turbo-generator's stator windings.

简要介绍采用高绝缘低沸点介质替代水内冷介质，用于汽轮发电机定子绕组内部冷却的原理。

Heat Transfer in Process of Vaporizing Cooling by Introduction of Volatile Liquid Coolant into Viscous Liquid

热粘液中引入挥发性冷剂进行汽化冷却的传热研究

Coolant mechanism cooling vat, for milk, incorporating a complete refrigerating unit or an evaporator of a refrigerating unit

冷却装置，冷却机理牛奶冷藏车，装有全套制冷装置或制冷装置蒸发器

It was showed that the temperature and flow rate of the secondary coolant, and the initial temperature of the water in the tank directly influence the cooling charge performance of the ice storage tank, especially the temperature of the secondary coolant.

研究表明，载冷剂温度、流量及其冰槽内水体初始温度直接影响着蓄冰槽的蓄冷特性，其中载冷剂温度更为明显；

A Discussion on Cooling Area of Horizontal Tubular Primary Gas Cooler

横管式初冷器冷却面积的探讨

Selecting Calculation of Three-port Modulating Valve in Cooling System With Surface Cooler

冷水表面冷却系统三通调节阀的选择计算

Based on the analysis of cooling capacity and water flow at load side ( surface cooler), provides control strategies for combined chillers with different number and other links.

根据对负荷侧（表冷器）冷量和流量特性的分析，给出不同冷水机组台数组合时的控制方案和其他环节的控制策略。

Brief Talk on Heating Design of Using Waste Heat of Lateral Pipe Cooler Cooling Water

浅析横管冷却器冷却水余热采暖设计

It was testified that CFD was a powerful tool to design and optimize the flow field in a cold store. Brief Talk on Heating Design of Using Waste Heat of Lateral Pipe Cooler Cooling Water

研究表明数值模拟在冷藏库流场优化设计中的应用切实可行而且优势显著。浅析横管冷却器冷却水余热采暖设计

The elliptical finned tube evaporative cooler is an efficient and energy saving refrigeration equipment that gets cooling capacity from nature directly, no use of CFCs and no environmental pollution.

椭圆翅片管蒸发冷却器是一种直接从自然界获取冷量、不使用CFCs、无环境污染的高效节能的制冷装置。

The Solution of a Ablation Transpiration Cooling Control System

烧蚀发汗冷却控制系统的解

A one dimensional ablation model with transpiration cooling control and nonlinear effect is studied, which is a distributed parameter control system with moving boundary and both governing equation and boundary conditions involving control variable.

本文研究了具有发汗冷却控制的一维烧蚀模型和非线性影响。这是一类具有活动边界的分布参数控制系统问题，且在方程与边界条件中同时出现控制变量。