edx的例句大全

EDX analyses showed the adsorbed film formed on the cast iron.

X-射线能谱分析显示在铸铁的摩擦表面有一吸附层形成.

The IMC phases were identified by energy dispersive X-ray ( EDX ).

用 X 射线能谱仪测定了化合物的成分.

By measured XRD, EDX spectrum, the little wire-shape rutile SnO 2 crystals ware obtained when added to excessive SnCl 2·2 H 2 O.

X射线衍射和X光 荧光能谱分析表明, SnCl2.2H2O的添加量较大时,还伴随生成金红相SnO2棒状晶体.

Combining X-ray diffraction and SEM-EDX observation, the state analysis method of yttrium in steel was established.

联合 X 线衍射和SEM -EDX 观察等方法建立了钢中钇的状态分析法.

We used X-ray , SEM, TEM and EDX etc.

利用 X -Ray 、 SEM 、 TEM和EDX等 手段表征材料纳米化和分析其氧化物的形貌及成分.

The homogeneity of the coating layer was characterized by SEM and EDX.

用SEM(扫描电镜)和EDX( 能谱)分析镀层的均匀性.

Fractured 1 Cr 18 Ni 9 Ti butt welding flange was analysed by OM, SEM and EDX.

用光学显微镜 、 扫描电镜和能谱仪分析了1Cr18Ni9Ti对接焊法兰盘断裂原因.

Note the register must be type cast ( IUnknown PTR [ edx ] ).

注意寄存器必须转换类型( IUnknownPTR [edx ] ).

The ratio of calcium and phosphate were examined with EDX.

X射线能谱仪(EDX)测量激光照射前后牙釉质中钙磷相对含量的比值的变化,初步探讨激光防龋的机制.

EDX results showed the Er contents in our as-deposited A 1203 films areabout 1 at . %.

EDX的结果显示我们得到了Er含量在1%左右的光波导薄膜.

Tremendous dynamic data of working crane RC beams are acquired by dynamic data recorder EDX-1500 A.

采用EDX1500-A动态数据记录分析仪器,测得钢筋混凝土吊车梁在实际工作中的大量动态数据.

The doped Bi — system superconductor has been studied by the methodof SEM and EDX.

通过SEM、EDX对掺杂的Bi-系超导体进行了研究.

Mooc providers such as Coursera and edX have broken new ground.

Coursera和edX等提供Mooc的机构已经走出了一条新路。

TEM, SEM, WDX EDX and selected area electron diffraction are used to study th secondary crystalline phase in Al_2O_3 ceramics containing 0.1& 0.5wt% MgO as solid solution.

应用TEM、SEM、WDX、EDX及选区电子衍射，对掺入0.1&0.5wt%MgO的微晶氧化铝陶瓷因固溶而形成的第二结晶相进行研究。

On Tuesday, Stanford announced that it would work with EdX to develop a joint educational system that will make use of the automated assessment technology.

周二，斯坦福大学宣布它将会与EDX合作开发一个联合教育系统，并将利用自动化评估技术。

The process of Fish-eye Flake formation in welding seams of 16 Mng steel is investigated by means of SEM, EDX, IMA, SIMS reflectoscope and X-ray flaw detection as well as metallography technique.

运用扫描电镜、x射线能谱仪、离子探针、超声波探伤仪及x射线探伤、金相技术等多种手段对16M ng钢焊缝中鱼眼白点的形成过程作了综合研究。