ejector的例句大全

By optimizing ejector combustor geometry, ejector rocket in SMC combustion mode can obtain comparable thrust augmentation.

通过优化引射器后体结构, 在SMC二级燃烧模式下工作的引射火箭可以产生较大的推力增强.

Steam ejector is one fluid machine that pumps low-pressure fluids with high-pressure steam.

蒸汽喷射器是一种利用高压蒸汽抽吸低压流体的流体机械.

In 1916, Yeomans added the Shone ? Pneumatic Ejector and other ancillary equipment.

1916年, 约曼的产品系列有增加了气动喷射泵和其它辅助设备.

Reasonable ejector assembling configuration means higher pumping capacity as well as better pressure adaptability.

合理的喷管安装构型可同时提高引射增压能力和压力匹配能力.

Hide the ejector seat levers.

隐藏弹射座椅的操纵杆.

Ejector seat levers can only be used once, and their consequences are significant and irreversible.

弹射座椅操纵杆只能用一次, 它的使用将引起重要的变化,而且这个过程是不可逆的.

Figure 10-8 : Ejector levers have catastrophic results.

图 10-8 弹射操纵杆具有灾难般的后果.

Some suction is provided by the ejector scrubber and the tail gas fan.

喷射洗涤器和尾气排风机可提供部分吸力.

The results have an important reference value for selecting primary nozzle types of exhaust ejector systems.

试验结果对排气引射系统主喷管选型设计有重要的参考价值.

The attachment region may surround an orifice in the fluid ejector substrate.

该附着区域可以围绕该流体喷射器衬底中的孔.

The attachment region need not cover any portion of an inner surface of the fluid ejector.

该附着区域不需要覆盖流体喷射器的内表面的任何部分.

Figure 10-8 : Ejector seat levers have catastrophic results.

图10-8弹射操纵杆具有灾难般的后果.

FIG. 2 shows a bottom view of the coated fluid ejector 105.

附图2表示涂覆的流体喷射器105的底视图.

Adopts stratified air conditioning mode with ejector nozzle air supply outlets for this large space building.

该展览中心空间高大,采用分层空调方式,喷口送风.

No contact between header punch and ejector; resulting in longer ejector life.

在头部 冲压机 和排放器之间没油接触,这样能够产生更长的排放器寿命.

The non-wetting monolayer may not cover any portion of an inner surface of the fluid ejector.

该 非 湿润单分子层不能覆盖该流体喷射器的内表面的任何部分.

The process is emphatically introduced about using the low-lift and large-flow pumps as the water charging pumps of the barometric condensers, as well as the technic improvement measures by discharging incondensable gas through by-pass pipes during normal running without operating ejector vacuum pumps.

重点介绍了大气冷凝器的上水泵使用低扬程、大流量泵的工艺，以及正常开车时，在不开启喷射泵的情况下，通过旁路管可以排出不凝气等技改措施。

Study on supersonic flow field in steam ejector by 3D simulation

蒸汽喷射泵超音速流体三维模拟研究

The supersonic flow field in steam ejector nozzle was 3D simulated with the software FLUENT for large computational fluid dynamics.

利用大型流体力学软件FLUENT，对不同结构尺寸和边界条件的蒸汽喷射泵喷嘴内超音速流场进行了3D模拟。

The technological parameters can be optimized through research on layout relations between wheel gripper, dumper, traverser, ejector etc.

通过对夹轮器、翻车机、迁车平台、空车调车机等设备之间的布置关系的研究，可以对工艺参数进行优化；