element的例句大全

The normal cross section M φ curve of the round ended piers of reinforced concrete bridge was determined by finite element method.

应用有限条法，对圆端形桥墩正截面弯矩-曲率（Mφ）关系曲线进行计算。

Some companies which seep metal element with TD salt-bath mainly use outside-heat crucible salt bath furnace.

在国内一些应用TD盐浴渗金属的单位目前主要用外热式坩埚盐浴炉。

Finite-element calculation of bearing seat of new type roller crusher

新型辊式破碎机轴承座的有限元计算

IMG element as a part of the link.

将IMG元素作为链接的一部分.

Finite Element Analysis of Prestressed Reinforced Concrete Light Rail Bridge

预应力钢筋混凝土轻轨桥梁的有限元分析

This paper studies the effects of array element width on half-power bandwidth, and proposes a new method.

文章考虑了阵元宽度对主瓣半功率点宽度的影响，并与忽略阵元宽度的线列阵的情况进行了比较。

Tie beam is an important element in frame-shear wall structure.

连梁在框架-剪力墙结构中，也是很重要的一个构件。

The finite element model, which is composed of JM worn type of locomotive wheel, standard 60 kg/ m rail, rail fastening, rubber tie plate and ballast bed, well simulates actual wheel-rail contact state.

建立的机车JM型磨耗型踏面、60kg/m钢轨、扣件、橡胶垫板和道床等有限元模型更加真实地模拟了轮轨接触状态。

The author points out: the failure to perform one's duty is not the common element.

该文认为：“不履行职责”不是二者的共同点；

Finite Element Dynamic Analysis on Working Equipment of Backhoe Single Bucket Hydraulic Excavator

液压反铲挖掘机工作装置有限元动态分析

Finite Element Analysis of Stress and Contact Pressure of Rubber O-sealing Ring with Back-up Ring

O形橡胶密封圈配合挡圈密封的应力与接触压力有限元分析

The Calculation of Contact Strength for Combined Turbine Rotors with Finite Element Method

透平机械转子组装件有限元接触强度计算

Conveying capability of screw depended on screw elements and element length.

输送性能取决于螺杆元件和元件长度的变化。

The negative conveying screw element has a marked effect on the morphology changes of polymer blends.

及向螺纹元件对共混物相态变化影响显著。

Detecting a small area failed fuel element with a moving__piece precipitator

用片型静电沉降器监测燃料元件的小面积破损

The finite-element analysis of bulging process has been made to investigate the effects of geometry of the magnetic impulsive forming system on the final deformation.

通过铝板毛坯胀形过程的有限元模拟，分析了磁脉冲成形系统几何参数对终态变形的影响。

An Investigation of the Effects of Geometry of the Flat Workpiece Magnetic Impulsive Forming System on the Final Deformation by the Finite-element Analysis

板坯磁脉冲成形系统几何参数对终态变形影响的有限元分析

A 3 D Boundary Element Method and Minimum Strain Energy Density Factor Theory ( S theory) were used to study the stability and propagation of cracks at the heel of high arch dams using a double curved arch dam as a case study.

以一个双曲拱坝为实例，用三维断裂分析边界元法和最小应变能密度因子理论研究了高拱坝上游坝踵裂缝稳定性及扩展的情况。

A dragger is an object that moves a DOM element around in response to a moving cursor.

一个dragger就是一个对象，它能对应移动的光标移动DOM元素。

Application of multi element composite ground in groundwork processing of drainage culvert;

研究多元复合地基承载力对其设计具有重要意义。