error的例句大全

Setting Method of Baud Rate of CAN Bus and Its Error Analysis

CAN总线波特率设置方法及误差分析

In fact, the code above won't quite work: It gets a bus error when the SPE tries to retrieve its arguments.

实际上，上面的代码并没有多少工作：当SPE试图检索自己的参数时，会得到一个总线错误。

A machine-check mechanism has detected a CPU or bus error.

机器检查机制检测到CPU或总线错误。

The worst that can happen is a bus error or parameter mismatch, but the cause of such a problem may not be immediately obvious, so double-check declarations shared between PPE and SPE.

最糟糕的是总线错误或参数不匹配，但是这种问题可能不会马上表现出来，所以一定要仔细检查在PPE和SPE之间共享的声明。

In particular, Section 2.3 discussed a number of error sources that can seriously affect measurement accuracy.

特别是, 在第2.3节讨论了各种严重影响测量准确度的误差源.

Error compensation is an efficient way to improve machining accuracy of NC machine tools.

误差补偿技术是提高数控机床加工精度的有效途径.

Comparative Analysis of Dentiform Error by Scatter Measuring and Seriate Measuring

离散与连续测量齿形误差的分析比较

Analytic calculation of ellipticity error effect in neutron penumbral imaging

中子半影成像中椭圆度误差的解析计算

There is more error in simulating void growth under unaxisymmetry triaxial stress conditions using R-T model and GTN model.

用R-T模型、GTN模型模拟非轴对称三轴应力状态下材料微孔洞损伤演化有较大的误差。

It turns out that this particular error message is due to incompatible GLX configurations on the client and control nodes.

产生这个特殊的错误消息是因为客户机和控制节点上存在不兼容的GXL配置。

An analysis on the geometrical firing data ( gfd) error of self-propelled guns positioned by GPS

自行火炮GPS定位几何诸元误差分析

Based on the relative error minimizes principle, the grey combination prediction model was discussed.

以这些模型为基础,按照相对误差极小化的原则, 建立了灰色组合预测模型.

OEM clients who signs this order confirmation means acceptance of ±5 % manufactuirng error.

凡订做产品者,签订此函即表示接受±5%的生产数量误差.

An error compensation method for intelligent electromagnetic compass ( IEMC ) is studied.

研究了一种智能电子罗盘的误差 补偿问题 .

An error compensation strategy is adopted properly to improve the manufacture precision of CNC machine effectively.

为用适当的误差补偿策略做准备,可有效提高数控机床的加工精度.

Error compensation technology is efficiency track to improve rotary accuracy of precision machine tool.

误差补偿技术是提高精密机床主轴回转精度的有效途径.

Study of the rowing movement, the speed of solving the error compensation method.

研究了划船运动下, 速度解算的误差补偿方法.

And then it can offer the basis of error compensation for machinery procedure.

进而能为机加工程序提供误差补偿依据.

On the basis of above research, the measuring error compensation method for free-form surface is proposed.

在此基础上, 进一步提出了自由曲面测量误差的补偿方法.

An on-line modified or modeling method of thermal error compensation model for CNC machines is presented.

提出了一种数控机床热误差补偿模型 在线 修正或在线建模的方法.