extrusion的例句大全

The Virtual Assembly of Wainscot Extrusion Dies Based on SolidWorks

基于SolidWorks环境的壁板挤压模虚拟装配

Numerical Simulation of Big Flakiness Ratio Copper Flat Wire Continuous Extrusion Forming for Different Hindrance Angles

不同阻碍角下大宽厚比铜扁线连续挤压过程数值模拟

Fracture of needle-shaped eutectic silicon in Si-Al alloy processed by equal channel angular extrusion

等通道转角挤压硅铝合金针状共晶硅损伤断裂实验

Reducing sugar content of saccharified extrudates was analyzed using the method of quadratic orthogonal rotating combinatorial design and the optimum parameters of extrusion system was obtained.

用二次正交旋转组合试验设计，对脱胚玉米挤压膨化物糖化后还原糖含量进行分析，得出良好的挤压膨化工艺参数。

RE-LD_ ( 31) Extrusion Aluminium Alloy Oxidizing Coloring and the Properties of Oxidized Membrane

稀土LD（31）挤压铝合金阳极氧化着色及其性能研究

Based on the optimized parameters, the backward extrusion and ironing formation technology experiment of shell parts is done.

接着，论文用优化的工艺参数对电池壳体零件的反挤压+变薄拉深成形工艺做了试验，归纳了反挤压和变薄拉深的模具设计要点和经验。

The Comparison and assess of Calculating Methods of Backward Extrusion Pressure for Aluminum Alloy Cups

铝合金杯形件反挤压力计算方法的评比

The set-up is designed for experiments of backward extrusion under conditions of semi-active friction and can be used in practical production as well.

设计了可用于实验和生产的半积极摩擦反挤压的实验装置。

The Simulation of Cup Backward Extrusion Process

杯形件反挤压成形过程模拟研究

The Slab Solution for Biconical Punch for Backward Extrusion of Cup-like Piece

双锥冲头反挤杯形件的主应力解

Calculated deformation rule has some reference to the design of backward extrusion process.

计算得到的变形规律对于链条滚子的反挤压工艺设计具有一定的参考作用。

The Application of the Backward Extrusion in the Fabrication Process of Silver Alloy Materials

反向挤压在银合金材料加工中的应用

Based on rigid-plastic finite element method, backward extrusion process of TB10 titanium alloy cylinder was simulated numerically.

基于刚塑性有限元法，对TB10钛合金筒体反挤压过程进行数值模拟。

A Research on Unstable State of Backward Extrusion Pressing

反挤压不稳定状态的研究

In the second part of the paper, the technology parameters of backward extrusion parts are optimized.

其次，论文对反挤压零件的工艺参数进行了优化。

The experiments prove the effectiveness of semi-active friction in lowering the pressure of backward extrusion for cup-like pieces of rolling bearing steel.

在实验装置上验证了轴承钢半积极摩擦反挤杯形件降低挤压力的效果。

The backward extrusion process is a chief method to form the parts of nonferrous, iron and steel materials. It has been widely applied to the metal forming industry.

反挤压成形是有色金属、钢铁材料生产与零件成形加工的主要方法之一，在金属塑性成形工业生产中有着广泛的应用。

Experimental research of the influence of backward extrusion on the mechanical properties of SiCw/ 6061 composite

反挤压对SiCw/6061力学性能影响的实验研究

Combination with the design experience, the critical value depth-width ratio in the backward extrusion formation of rectangular shell parts is concluded.

结合模具设计的经验，推断出了反挤压成形矩形壳体零件的临界高／宽比。

A Method to Prevent the Extruded Part Sticking to the Die in Isothermal Backward Extrusion

等温反挤压中挤压件抱模的防治方法