handwheel的例句大全

Hammerblow handwheel adapters can be furnished with handwheel or chainwheel construction.

锤击手轮接合器可以配置在手轮或链轮结构上.

The most economical mechanism for tight shutoff is the impactor handwheel.

要做到紧密关闭,最经济的机械装置就是冲击式手轮.

The extension includes fittings and extension pipe with handwheel or nut mounted.

加长件包括连接件和加长管件,带手轮或螺母安装.

Possible handwheel orientations are shown in the figure to the right below.

可能的手轮方位如下图右侧所示.

This dimension must be at least twice dimension from line to handwheel.

这个尺寸必须至少为从阀门中心线至手轮距离长度的两倍.

This robust handwheel is used in association with the machine control.

该坚固的操纵轮用于与机床控制的联合使用.

The extension includes fittings and extension pipe with handwheel mounted.

加长件包括连接件和加长管件,带手轮安装.

Includes floorstand with gate position indicator, handwheel, fittings and extension.

包括带有闸板指示器的地轴承架, 手轮, 连接件和加长件.

It is the handwheel adjustment of the kerosene stove wick.

这是煤油炉炉芯的手轮调节处.

Valves supplied with hammer blow handwheel as a standard.

锤击手轮是阀门的标准配置.

Valves are supplied with a handwheel actuator on all sizes.

所有通径的阀门都配置手轮执行机构.

Handwheel adjusting mechanism with digital display, accurate and flexible.

手轮调节机构带刻度显示, 准确灵活.

Bearing very good circuit-adjusting function and accurate controlled value of handwheel.

3具有良好的流量调节功能和精确的手轮开启量指标.

Specify required extension length from centerline of valve to handwheel.

注明从阀门中心到手轮的所需加长件的长度.

Minimum dimension from centerline of valve to handwheel when ordered without floorstand.

如果不订购地轴承架,则最小长度尺寸为阀门中心至手轮的长度.

Gear operated valves shall be equipped with position indicator and high impact polypropylene handwheel.

齿轮操作蝶阀应该配置位置指示器和高强度抗冲击聚丙烯手轮.

Carefully remove handwheel and turn indicator sleeve assembly, leaving the valve at its balance set point.

小心拆卸手轮,并旋转指示器套筒总成, 将阀门保留在它的平衡设置点上.

The disc position corresponds with the decimal indicator viewed through the handwheel window.

阀瓣位置与十进制指示器相一致,并可通过手轮上的窗口一览无遗.

Bevel gear actuators are available on 2-48 " ( DN 50-DN 1200 ) valves with handwheel or actuators. "

锥齿轮执行器可以配置在通径为 DN50 ~DN1200并且 带有手 轮或链轮的阀门上.

Actuation – can be supplied with a hammerblow handwheel, manual gear set, electric motor operator, pneumatic Globe valve calss300Lb or hydraulic cylinder operator.

执行机构–这些阀门可以配置打击手轮，手动齿轮装置，电动执行机构、液动或气动执行机构。