initiator的例句大全

Uses: 1, Organic macromolecule industry: initiator for polymerization.

用途: 1 、 有机高分子工业: 聚合引发剂.

Zhou Zuoren was the first initiator and pioneer of modern Chinese proses.

周作人是现代散文的最早倡导者与开拓者.

It could act not only as a radical trapper but an initiator of ATRP.

它不但可以用作自由基聚合的引发剂,同时也可以作为自由基的捕捉剂.

In the process of translational action, the initiator decides the communicative purpose.

在翻译过程中,由翻译行为的发起者决定译文的交际目的.

The results show that thermal decomposition series of bifunctional initiator is 1, thermal decomposition factor of it is 6.63 × 1010, thermal decomposition activation energy of it is 82.6KJ/ mol;

初步研究结果为，双官能度引发剂热分解级数为1级，热分解频率因子为6.63×10~（10），热分解活化能为82.6KJ／mol；

Study on the Polymerization of Acrylamide Initiated by Bifunctional Initiator

双官能度引发剂引发丙烯酰胺聚合研究

Synthesis and Characterization of a Bifunctional Initiator Containing Azo Bond and Aromatic Amine Group

含有偶氮键和芳香胺基双官能团引发剂的合成及表征游离基-阴离子引发剂

Through homopolymerization posthydrolysis process, the partially hydrolyzed polyacrylamide ( PAM) with super-high relative molecular weight is synthesized by two-stage polymerization method and bifunctional initiator initiates the polymerization, and the effects of polymerization and hydrolysis technical parameters on the relative molecular mass are studied.

选择均聚后水解工艺，采用双官能度引发剂和二段聚合法合成了部分水解超高相对分子质量聚丙烯酰胺；考察了聚合工艺参数和水解条件对聚丙烯酰胺相对分子质量的影响。

The factors influencing the graft rate were analyzed with the graft copolymerization of the silk fiber with acrylamide as grafting monomer and ammonium persulfate as initiator. The structure and primary properties of the modified silk fiber were also tested.

以丙烯酰胺（AM）为接枝单体、过硫酸铵（APS）为引发剂对真丝纤维进行了接枝共聚反应，分析了接枝率的影响因素，测试了改性真丝纤维的形态结构和主要性能。

The influence on the water absorbing capacity, such as monomer concentration, effect of catalyst, and initiator concentration, were investigated.

文中研究了单体浓度、催化剂效果、引发剂浓度对吸水能力的影响。

The effects of initiator concentration, monomer concentration and temperature on the homopolymerization have been discussed.

讨论了引发剂浓度、单体浓度、温度对均聚合的影响。研究了两个单体均聚合反应动力学，提出了两个单体均聚合反应动力学方程。

Investigated the influence of monomer concentration, initiator concentration, reaction temperature and time on grafting efficiency.

丙烯酰胺接枝共聚物，对单体浓度，引发剂浓度，反应温度和反应时间对接枝率的影响进行了研究。

The influence of the monomer concentration, reaction temperature, concentration of initiator and retention time on the grafted ratio was studied.

通过对聚丙烯进行官能化，并主要研究了反应单体浓度、反应温度、引发剂浓度和停留时间对接枝率的影响。

The effects of monomer concentration, reaction temperature, initiator dosage on polymerization rate and intrinsic viscosity of product were investigated.

探讨了单体浓度、反应温度、引发剂用量等因素对聚合反应速率和产物特性黏数的影响。

Kinetic studies show that polymerization proceeds with first-order dependence on both monomer concentration and initiator concentration.

聚合反应的动力学实验表明单体和催化剂浓度对该聚合反应的反应速率都表现为一级。

The relationships of molecular weight and monomer concentration, initiator concentration show that the polymerization reaction system has the characteristic of living polymerization.

分子量与单体浓度、引发剂浓度的关系说明，该体系具有一定程度的活性聚合特点。

The effects of initiator concentration, monomer concentration, starch concentration and temperature on the percentage of graft were investigated.

考察了引发剂浓度、单体浓度、淀粉浓度和反应温度时接枝率的影响。

The influencing factors such as granularity of raw materials, dosage of initiator and monomer concentration was discussed.

讨论了原料粒度、发剂用量以及单体浓度等因素对反应的影响。

The effects of polymerization conditions, such as initiator concentration, monomer concentration, reaction time and temperature, on grafting parameters were studied.

研究了各种聚合条件如：引发剂浓度、单体浓度、反应时间、温度等对接枝参数的影响。

The results show that the reaction rate is in direct proportion to one power of monomer concentration and a half power of initiator concentration;

实验结果表明，在聚合反应初期，聚合反应速率与引发剂的浓度呈半级反应，与单体浓度呈一级反应；