introduced的例句大全

The quality check mode of No.4 billet caster has been introduced, and the innovative approaches for problems existing in the check have been put forward.

介绍了4号方坯连铸机铸坯质量检验的模式，并对检验过程中存在问题提出改进措施。

In this study we introduced the diagnostic methods and steps of the rise of biliary system stone by B-Mode ultrasound.

本文介绍B型超声提高胆道系统结石诊断的方法和步骤。

Then the bidding rules based on the capacity and the adjustment of generation are presented, Furthermore, a method of congestion management, combined with the prize zone and the spot price, is introduced to be suited to the multi layer power market in future in China.

设计了基于容量报价和调整报价两种实时报价方法，给出了将区域电价和实时电价相结合的阻塞管理方法以适应我国未来的多级电力市场模式。

The paper introduced the methods and countermeasures of bidding quotation programming for highway engineering.

报价策略运用是否得当，对投标单位的生存与发展，以及能否中标并获得利润影响很大。论述了公路工程投标报价编制的方法和采取的对策。

This paper, in detail, introduced how to study the rule of image construction for biconvex lens by using the method of vision difference.

本文详细地介绍了如何运用视差现象研究凸透镜的成象规律。

The general situation of production technique and tensile mechanism of biaxial orientation PVC-U tubing are introduced, and their characteristics are explained, which have certain instruction to realize their commercial application.

介绍了PVC-U双轴取向管材的生产技术概况和拉伸机理，对它们的特点进行了说明，对实现工业应用具有一定的指导作用。

Progress of recent studies on the deformation mechanism for spherulites of isotactic polypropylene ( I PP) in the uniaxial and biaxial orientation process was introduced.

介绍了近来国内外对单向、双向拉伸过程中全同立构聚丙烯（iPP）晶体内部球晶形变机理的研究进展。

A silent nucleotide change was introduced into the cDNA clone to create a Xba I site ( C to T at 8453nt) that is used as a genetic marker of this infectious clone. This genetic marker was retained in the genome of recovered progeny virus.

全基因组cDNA克隆构建过程中引入的沉默突变（8453位核苷酸由C变为T）产生Xba I酶切位点作为遗传标记，在子代恢复病毒的基因组中稳定存在。

Accordingly, a FIR filter based on frequency response masking technique is introduced into the design of digital down-converters, its efficient implementation architecture is given and the complexity of the algorithm are studied thoroughly.

该文将基于频率响应屏蔽（FRM）方法的FIR滤波器引入到数字下变频器设计中，并详细地研究了此类数字下变频器的高效实现结构和算法复杂度。

Design and construction of cast-in-situ concrete vertical pile ( embedded in rocks) foundation applied in the loading berth project of Fuzhou Port Hesha Wharf are briefly introduced.

扼要介绍嵌岩灌注直桩桩基应用于福州港河沙码头装船泊位工程的设计和施工概况。

The principle and key points in the design of floating decanter with automatic rubber ball valve were introduced, and the performance of domestically produced large floating decanter was described.

介绍了采用自动橡胶球阀的浮动式滗水器设计原理和设计要点，并详述了完全国产化生产的大型浮动式滗水器在实际运行中的性能。

This paper introduced a dynamic layered multicast scheme, DLM, to address multicast receivers' heterogeneity in available bandwidth. DLM uses an optimal layer rate allocation algorithm which can maximally satisfy each receiver's available bandwidth.

针对多播接收者的可用带宽异构性问题，提出了一种动态分层多播拥塞控制算法（DLM），DLM运用最优化层传输速率分配算法来自适应地满足接收者的异构性。

Equivalent bandwidth is introduced in the decision criterion for the dynamic slot allocation algorithm for VBR video source.

在VBR图像的动态时隙分配算法的判决条件中引入了等效带宽的概念。

Taking the radial wear allowance of the bearing pair as the monitoring parameter of the bearing working status, and taking the rapid change of the bit speed and the working torque as the alarm signal, the trial of alarm technology for cone dropping is introduced.

文章介绍一种以轴承副的径向磨损量作为轴承工作状态监测参数、以钻头机械钻速和工作扭矩的急剧变化作为预警信号的牙轮脱落预警技术的试验研究成果。

It is an ideal production modular to weave tie silk with electronic jacquard device, which is highly technical Several methods of developing electronic jacquard tie silk are introduced with some examples in this paper

利用电子提花机制织真丝领带绸，技术含量高，是理想的领带绸生产模式。文章以实例介绍了电子提花真丝领带绸的产品开发方法

Several methods of developing electronic jacquard tie silk are introduced with some examples in this paper.

文章以实例介绍了电子提花真丝领带绸的产品开发方法。

Transient and average thrust are two important performance parameters of pulse detonation engine. The principle and system structure of direct measurement method and indirect measurement methods ( including thrust wall pressure integral method and ballistic pendulum method) are introduced.

针对脉冲爆震发动机瞬时推力、平均推力测量问题，介绍了直接测量法和间接测量法（包括推力壁压力曲线积分法和抛物摆法）的测量原理及系统构成。

Different drag correction coefficients at different time points are introduced, and then both speed curve and ballistic curve fitting are finished.

采用在不同时间点增加阻力系数修正系数的方法拟合速度-时间曲线和位置-时间曲线。

In this paper, method of calculation for pumping of water vapour with gas ballast pump is introduced.

本文介绍用气镇泵抽除水蒸汽的计算方法。

The artificial neuron model and backbone structure of neural network is introduced.

介绍了人工神经元模型与神经网络基本结构。