load的例句大全

Elastic deformation is nonpermanent, which means that when the applied load is released, the piece returns to its original shape.

弹性形变是非永久性的，即撤去加载后，样品可恢复初始的形状。

The simulation results show multicast routing algorithms have shorter average latency and higher throughput and balanced applied load compared with unicast routing algorithms.

通过模拟实验表明，多播较单播通信具有更小的平均传输延时和更高的网络吞吐量，且负载分配均匀；

Plastic deformation takes place first at the crack tip and spreads across the solid as the applied load is increased beyond general yielding.

塑性变形首先发现在裂纹顶端，当工作载荷超过了普通屈服时，则传播到物体中。

In terms of geometry, the defining parameters are the body width, hole diameter and the location of the applied load.

在条款几何，确定参数是身体的宽度项，孔直径和地点应用负载性。

Elastic deformation is that part of the deformed material which when the applied load is removed would spring back to its normal shape.

弹性变形是材料变形部分在去除载荷后可以恢复到原来的形状。

At zero applied load, the crack is closed along the perimeter of the specimen but open in the center.

在施加零载荷处，试样周边的裂纹是闭合的，而中心则是张开的。

The result shows that the optimal value of filler metal thickness exists and the residual stress decreases with the applied load increasing.

结果表明，钎缝厚度存在最佳值，在一定范围内钎焊压力增大，残余应力减小。

The relationship of stress versus strain of this asphalt mortar under the constant tension load is obtained using the non linear regression analysis, which is well in coincidence with the viscoelastic four parameter liquid model and exponent model.

并应用非线性回归分析得到该材料受单轴恒定荷载下的应力应变关系，可较好地符合粘弹性四元流体模型（即伯格斯模型）和指数模型。

On the other hand, the train body could be attainted when it is strike by the aerodynamic load.

另外，气动载荷作用于车体会使车体受到强烈的冲击而损坏车体结构。

The full stress design of a cantilever beam under a combined load is discussed.

讨论了悬臂梁在联合载荷作用下满应力截面设计问题.

The load design of shuttle mining car's scraper conveying mechanism is analyzed and determined.

介绍梭式矿车的主要用途和特点,梭式矿车的刮板运输机构在设计中的受力分析和确定.

With the method of numerical simulation, the paper simulates the luohe bridge at the Longest Cantilever Construction Stage in the FLUENT procedure in order to compare the factor of wind load with experiment result.

以数值模拟为研究方法，在FLUENT程序中模拟了洛河大桥施工阶段最大双悬臂状态，将得出的压力系数与试验结果进行了比较；

A development of Construction Process Mechanics-Principles of Time-Space Effect and Varying Load Analysis has been presented.

本文总结了施工过程力学的要点,并对其做了进一步发展,进而提出了 时空 效应和变载分析原理.

This article discusses the dynamic computation of the closed cylindrical shell under impact load.

本文讨论闭合圆柱形壳体在冲击荷载作用下的动力计算.

Analysis on the Stress Fieid of Asphalt Pavement Structure under Heavy Load Traffic

重载作用下沥青路面结构层应力场分析

The larger the surface roughness and the sharper the asperities, the greater the asperity contact load.

表面越粗糙、表面凸峰越尖锐，微峰接触载荷则越大。

The prediction of the mean crushing load agrees well with the experimental data.

计算结果表明新的平均压溃载荷计算公式能够更好地拟合实验结果.

Research on ascertaining heating load of house-hold and heat metering system

分户计量供暖系统热负荷确定方法探讨

Study on the Ascertaining Method of the Max Load in Spectrum Making

编谱中最大载荷的确定方法

To solve attitude measurement problem of the gun-launched cruise projectile under high over load, a precision measurement method was proposed, based on geomagnetic field.

针对高过载下炮射巡飞弹姿态难以测量的问题，提出了基于地磁场的姿态测量方法。