lubricated的例句大全

The availability of credits lubricated the channels of trade.

信用证的使用使贸易渠道更为畅通.

A 45 % glass reinforced, lubricated liquid crystal polymer resin with improved toughness.

%的玻璃纤维增强, 润滑液晶聚合物树脂改善韧性.

As lubricated with outside clean water, bearings are of long life.

导轴承由外接清洁水润滑, 使用寿命长.

The four pillars are lubricated mechanically. Just press the button to lubricate.

四柱采用机械式加油, 只需按动按钮,便可加油.

His proposal is that all machines here are well lubricated.

他的提议是,这里所有的机器都要好好上油.

Using an independent external lubricated bearings, allowing delivery of various non-lubricating medium.

采用独立润滑的外置轴承, 允许输送各种 非 润滑性介质.

All machinery must be lubricated periodically according to the lubrication chart.

所有的机械都必须根据润滑图表定期加油.

The interacting surfaces were lubricated with a mineral oil.

相互作用表面是用矿物油润滑的.

It is necessary that those machines should be lubricated regularly.

那些机器必须经常上润滑油.

For use in most machine tool bearing & gearboxes lubricated by circulating system.

可用于工具轴承 及 齿轮箱循环系统.

Gear must be properly lubricated.

齿轮必须适当地加油润滑.

One mode is slippage along the discontinuity provided by the lubricated fault plane.

其中一种方式是沿着润滑的断层面所形成的间断面而发生滑动.

Bearings must be lubricated periodically.

轴承必须定期润滑.

Ceramic friction pairs operating in temperature environment must be properly lubricated.

工作于高温环境中的陶瓷摩擦副,其润滑问题必须得到解决.

Lubricated air compressor coupling, visual inspection of dry type coupling.

润滑空压机联轴器, 目视检查干式联轴器.

Mount the workpiece onto a lubricated mandrel of the proper size by using an arbor press.

通过利用杠杆式冲床将工件锚定在适当尺寸的润滑心轴上。

Non-lubricated, tapered plug assures tight seal with low breakout torque. Constructed of hardened materials with optional hard facing.

无润滑，锥形阀塞确保紧密密封，并且具有很低的启动扭矩。有硬化材料构造而成，配置备选硬面。

When we think of contamination in lubricated systems, we often focus on particle and water contamination.

我们一说起润滑系统中的污染,首先会想到微粒污染与水分污染(注:水对润滑系统是极其有害的).

The results show that surface convexes can reduce the friction coefficient obviously under lubricated conditions.

采用销-盘摩擦试验机评价规则微凸表面在不同载荷和速度下的摩擦学性能.

The cupping value of lubricated aluminum alloy sheet is studied by BCS-30D general sheet metal test machine.

在BCS-30D通用板材成形性试验机上，对铝合金薄板的杯突值进行了不同润滑条件的试验研究。