lubrication的例句大全

Some of the quantities involved in elastohydrodynamic lubrication may be mentioned.

下面提供一些与弹性流体动力润滑有关的量.

Sludge can also clog oil passages and prevent normal engine lubrication.

油泥还会阻塞油路,妨碍发动机的正常润滑工作.

All moving parts within the pump are using the transmission medium lubrication.

泵内所有运转部件均利用其输送的介质润滑.

Lubrication with a watersoluble jelly is preferred.

最好用水性胶润滑剂.

Lubrication and good abrasion resistance strong, and prolong engine life.

润滑性好,抗磨性强, 延长发动机使用寿命.

The valve should require no lubrication, and contain no " dead " volumes.

注样阀应无需润滑, 阀内要无 “ 死 ” 角.

Youliang tune the main plate , Adagio, lubrication plate, cutting board.

主要板式有亮调 、 慢板 、 流润滑板 、 剁板.

In land animals, saliva contains mucus, and provides lubrication for food in the alimentary canal.

陆上动物的唾液内有粘液, 并对消化道内的食物起着润滑作用.

All machinery must be lubricated periodically according to the lubrication chart.

所有的机械都必须根据润滑图表定期加油.

In metal lubrication two distinct regions are recognized: boundary and hydrodynamic.

在金属的润滑作用中存在两个不同区段: 边界和流体区.

We shall require more lubrication oil this month.

这个月我们需要更多润滑油.

In peacetime, you should also note on bearing lubrication, prevent wear.

平时还应注意对轴承的润滑, 防止使用磨损情况发生.

Grease gun and oiler are the lubrication service tools for machinery.

油枪和注油器都是机械润滑维护工具.

Lubrication reduces noise and wear.

润滑作用能减少噪音和磨损.

Laughing this soundless lubrication, Jingui such as oil spring!

笑这润物无声、金贵如油的春雨!

Analyses the impact of stamping velocity and lubrication conditions on the friction coefficient and the relationship between friction coefficient and cupping value by simulate results.

根据模拟结果分析了冲压速度和润滑条件对摩擦系数的影响以及摩擦系数与镀锌板杯突值之间的相互影响关系。

The following are the specific of research: ( 1) Analysis the impact of stamping velocity and lubrication conditions on the cupping value of zinc-coated sheet by cupping test.

具体研究工作如下。（1）通过对镀锌板进行杯突试验分析了冲压速度和润滑条件对镀锌板杯突值的影响。

Home Manufacture of Hydraulic Lubrication System for 16-50 Hydraulic Rotary Crushers

16&50液压旋回破碎机液压、润滑站国产化

"D" type bearings with the lubrication mechanism of polymer, make the bearing surface, and return to the pump inlet side, in order to ensure the effective axis.

“D”型轴承结合了强制润滑机理，使聚合物经轴承表面，并返回到泵的进口侧，以确保旋转轴的有效润滑。

Investigation on Anti-wear Effects of Borderline Lubrication under Different Condition of Tribological Pairs

基于不同摩擦副条件下的边界润滑抗磨效果研究