measurement的例句大全

An in vitro digestible protein measurement was used to establish optimal conditions for the processing of canola seed.

通过体外（In Vitro）测定可消化蛋白质含量来建立卡诺拉菜籽加工的最佳条件。

Simultaneous temperature and thermal diffusivity measurement of ultra-high temperature material based on multi-spectral technique

基于多光谱技术同时测量超高温材料的温度和热扩散率

When measuring a shallow diffused layer at low concentrations, reliable measurement free of noise are difficult to make.

测量低浓度浅扩散层时，无干扰的可靠测量很难实行。

In order to avoid the interactions between displacement and rotation of VBC during measurement, diffused reflection optical triangulation is applied to measure the displacement of VBC.

该方法利用漫反射激光三角法测量摆动部分位移，避免了测量过程中位移与转动的干涉。

The influences of sound diffraction by a spherical shell on the measurement results and directivity of AVS were calculated by using the approximate equation of mechanical impedances of the thin spherical shell.

采用薄壁球壳机械阻抗近似公式，计算了球壳声衍射对矢量传感器声场测量和指向性的影响。

Influences of sound diffraction by elastic spherical shell on acoustic vector sensor measurement

弹性球壳声衍射对矢量传感器测量影响

The Regression Methods of One-Element Curve of Equal Accuracy Measurement in Calibration of Flow Differential Manometer of Water Turbine Spiral Case

水轮机蜗壳流量压差计标定中等精度测量的一元曲线回归方法

Thermal hysteresis activity of antifreeze protein solution a direct differential scanning calorimetric measurement

差示扫描量热法直接测定沙冬青抗冻蛋白的热滞效应

A set of conduction type high temperature calorimetric system for measurement of heat sink of endothermic fuels has been developed.

介绍了一套自制的热导式高温量热系统，热量常数可用电标定法测定。

Measurement of loss and efficiency for large AC electrical machines by the calorimetric method

GB/T5321-1985用量热法测定大型交流电机的损耗及效率

The automatic grinding of semicircular cambered surface of the cam bowl and its measurement

凸轮滚子半圆弧面的自动磨削及其测量法

Pine camphor oil quality standard measurement method with instrument

松醇油类质标质检仪器分析方法

Fig. 9 shows schematically the application of a differential transformer to measurement of liquid column height.

应用差动变压器测定液柱高度大致如图9所示.

Study of Molecular Interactions in Extraction System with the Dielectric Polarization Measurement

介电法研究萃取体系分子间的相互作用

Measurement of Metal Plastic Deformation Using Method of Laser Diffraction Spectrum Intensity Ratio

金属塑性变形的表面光反射率测量方法研究

In optical measurement, we could calibrate precision instrument and increase the measuring precision by using the laser interference ( diffraction) fringe orders; the fringe orders could be automatically determined by the zero order fringes' minimum chromatic polarization;

光测量主要通过激光发生干涉（衍射），利用干涉（衍射）条纹的级次进行定标、精确测量，利用零级条纹色偏最小原理，对条纹级次进行自动判断；

The measurement of diffraction fringe width, the tropism of incident light E and the transverse displacement of CCD are the main factors that influence this precision from the study of theoretical arithmetic and experiment.

理论计算和实验表明影响细丝直径测量精度的因素包括：衍射条纹宽度的测量、入射光波E取向和CCD的横向移动等。

Calculation Methods for the SNR of Diffraction Grating Efficiency Measurement System

红外光栅衍射效率测量系统信噪比计算方法的研究

An algorithm for power system frequency measurement based on numerical differentiation and central Lagrange interpolation is presented.

提出了一种基于数字微分和拉格朗日插值的系统频率快速而准确的测量算法。在未知信号参数的情况下，以一固定的采样频率如512×50Hz对信号进行采样，得到一采样序列。

A new method ( single loop differential method) for measurement of signal from strain gauges, is proposed in this paper.

针对电阻应变片输出信号的测量问题，本文提出了一种新方法&单回路差动法。