method的例句大全

CuSCN thin films were prepared by electrochemical deposition method in aqueous solutions using cupric sulphate and potassium thiocyanate as precursor materials.

本文采用电化学沉积法，首次以硫酸铜和硫氰酸钾的水溶液为前驱体原料，在ITO导电玻璃上沉积出了性能良好的p-CuSCN半导体薄膜。

The preparation of cuprous chloride from etching waste liquor of cupric chloride and crude copper powder was studied. The result showed that this method had many advantages, including simple process, easy operation and good quality of product, therefore it had remarkable economic and environmental benefits.

以氯化铜蚀刻液废液、粗铜粉等为原料，在常温下反应制备氯化亚铜，工艺简单，操作简便，产品质量好，具有显著的经济效益和环境效益。

In the system Cu ( I)-NaCl-HCl-H_2O, the cathodic process of cuprous chloride complex ion is studied by means of linear potential sweep method.

在Cu（I）-NaCl-HCl-H2O系中，用线性电位扫描法研究了亚铜氯化物络离子的阴极过程。

The preparation of high purity sodium cyanate by liquid-solid chemical reaction method

液固化学反应法制备高纯度氰酸钠

An improved haptic texture rendering method based on stochastic resonance is proposed utilizing the stochastic resonance phenomenon in human cutaneous tactile sensation.

根据人的触觉感知通道中的随机共振特性，提出了一种改进的增强纹理力触觉表达建模方法。

The Calculation of the Higher Order Modes Cutoff Wavelength in TEM Cells with TLM Method

用TLM方法计算TEM小室高次模的截止波长

Quality-Guided Phase Unwrapping Method Based on Placement of Branch Cuts

基于分支设置的质量导引相位展开算法

The results show that the Goldstein filtering method can improve effectively the distribution of residuals and branch cuts and raise the visual effects of the interferogram as well as the ratio of signal to noise.

结果表明：Goldstein滤波方法有效地减少了残点和枝切线的分布，提高了干涉图的视觉效果和信噪比。基于网络流的L1范数方法可以得到最优的全局解，但运算效率较低；

Content of the free-radical were determined using the paramagnetic resonance method. Result shows that high speed steel cutter blade wear seriously during fiber cutting, its main wear mechanism is abrasion of TiO_2 particles in fibers.

结果表明：切割涤纶半消光纤维时，高速钢刀片的磨损很快，主要磨损机制为纤维中TiO2粒子的磨粒磨损；

The Configuration Method and Practice on the Height Control System of Flame Cutter

火焰切割机高度控制系统配置方法与实践

The Processing Method for CNC Lathe With Feature of Full Range Thread Cutting

数控车床全螺纹功能的加工方法

Improve on traditional interpolated algorithm in CNC system& arc cutting method

CNC系统中传统插补法的改进-弧度分割法

A New Method for Calculation Shear Plane Area in Oblique Cutting with Double Edge

新的斜角非自由切削剪切面积计算方法

The paper proposes a new method for calculating shear plane area based upon a new oblique cutting model with double edge.

根据新的斜角非自由切削模型，本文提出了新的剪切面积计算方法。

The solving method for main cutting edge and grinding principle for flank of non coaxial helical micro drill point is described.

介绍了主切削刃的求解方法以及非共轴螺旋面钻尖后刀面的刃磨原理；

The apparatus and method for testing the thrust and torque on the main cutting edge and chisel edge of drill point was introduced.

通过试验测试了任意形状钻头切削刃的轴向力和扭矩，为钻头受力预测提供了一套完整的研究方法。

Preliminary study on removing drill cuttings by electrophoresis method

电泳法清除钻屑微粒的初步研究

A New Method of IF Signal Sampling in Quasi CW Radar

一种准连续波雷达中频采样的新方法

Sodium cyanate was prepared from reactants& urea and anhydrous sodium carbonate through liquid-solid chemical reaction method, in the solvent of N, N-dimethlformamide ( DMF).

使用液固化学反应法，以尿素和无水碳酸钠为原料，在N，N-二甲基甲酰胺（DMF）溶剂的反应介质中，制备了氰酸钠产品。

This paper brought forward the concept of choice of techniques as the historical analysis method, researched the function and range of choice of techniques, and did deeply study on this basis.

本研究以历史分析的方式，提出了技术选择的概念，考察技术选择的功能和范围，并在此基础上展开深入的理论研究。