method的例句大全

A method is introduced that the main 8031 single chip microcomputer controls several subordinate 8031 single chip microcomputers which in turn control a data memorizing board respectively. In this way the inner memory of the centre unit is increased.

本文还提出了由一片主8031单片机控制其它几个由从8031单片机控制的数据存储板，来增加主机内存量的一种方法。

A simulation method using digital computer simulation technique ( DCST) is described to analyze and calculate the reliability indexes of interconnected generating system.

本文提出了一种采用数字计算机仿真技术（DCST）对互联发电系统可靠性指标进行分析与计算的仿真算法。建立了相应的互联发电系统可靠性DCST仿真计算模型。

The results show: using DCST to obtain results of the calculation corresponds to the traditional analysis method and is adapted for more complex models.

结果表明，利用DCST所得到的计算结果与传统的解析法结果相一致，而且可以适应更复杂模型的计算。

This article introduces a method of measuring resistanceminute difference measuring.

本文介绍了一种测量电阻的方法——微差测量法.

Then the oriented integral surveying method using gyro theodolite is derived.

本文讨论了积分法的一般原理,并推导了陀螺经纬仪定向积分测量法.

Conclusions: Each method a useful tooldifferent measuring scale and different studying purpose.

结论: 不同根管弯曲度测量法的研究侧重点与观察尺度不尽相同,因而其适用范围也是不同的.

This method is suitable for low gloss and high-gloss paper.

该方法适合于低光泽度和高光泽度的纸张.

Abstract: The paper proposed a new method of tolerance allocation.

文摘: 提出了一种新的公差分配方法.

The optimal power allocation by float encoding method and the design of corresponding genetic operators by DCPM is presented in this paper.

本文通过对遗传算法进行浮点数编码，并按照DCPM方法设计相应的遗传操作，得到了用DCPMFGA求解最优负荷分配的方法。

Based on the analysis of characteristic of cable harness process planning in virtual environment, a discrete control point modeling ( DCFM) method of cable harness in virtual environment and the cable harness assembly routing technique based on DCPM are proposed.

在对虚拟环境下的线缆装配规划的特点进行分析的基础上，提出虚拟环境下的线缆离散控制点建模以及虚拟环境下基于离散控制点的线缆装配规划方法。

This paper introduces development method of portal pressure detecting instrument in gas-field.

介绍了一种气田井口压力检测仪表的研制方法.

Study on the Effect of DCMU on Photosynthesis of Plant by Delayed Fluorescence Method

利用延迟荧光研究DCMU对植物光合的影响

Based on J2EE and EJB, the operation process of DCMS and the database design method are presented.

以J2EE技术为基础，详细分析了DCMS的运行过程；阐述了EJB为基础的数据库设计方法，以及基于MVC模式和会话外观设计模式的DCMS的设计思想；

It is shown that the compliance method for determining the delamination size in DCLS specimens is not only convenient and practical but also accurate.

结果表明，用柔度法测定DCLS试样的分层尺寸，不仅测量结果准确，而且简单易行，避免了光测法的诸多麻烦和精度低的缺点。

For a modified Double Crack Lap Shear ( DCLS) specimen of fiber reinforced metal laminates, an expression which relates its delamination size and its compliance is derived. A method for determining the delamination size in DCLS by compliance test is developed.

导出了纤维金属胶接层板双面裂纹搭接剪切（DCLS）试样分层尺寸和柔度之间的线性关系式，提出了DCLS试样分层尺寸的柔度测量法，并与用光测法测得的分层尺寸进行了对比。

There is only one set of real image clusters in real-image method, as opposed to multiple complex image locations required in the discrete complex-image technique ( DCIT).

与离散复镜像方法（DCIT）引入多个复镜像相比，实镜像方法仅引入一个实镜像。

Compute according to the DCCT method, All data expectations are in the reference the scope, Basic agree with the clinic performance to match.

按照DCCT方法计算，全部数据预期都在参考范围内，基本与临床表现相符合。

Dcas features a method of using identities as rules to manipulate algebraic expressions.

Dcas突出体现了一种使用标识作为规则来操作代数表达式的方法。

The procedure for direct Displacement-Based Seismic Design ( DBSD) method of frame-shear wall structures is briefly introduced.

简述了框架-剪力墙结构直接基于位移的抗震设计过程。

The displacement demands of symmetric and asymmetric continuous girder bridges in longitudinal direction are studied, and then a DBSD method is proposed, an example is given.

分别对纵桥向对称和不对称的连续梁桥的固定墩墩项位移需求进行了研究，在此基础上提出了连续梁桥纵桥向基于位移的抗震设计方法，给出了该方法的算例。