microstructure的例句大全

Influence of Composition and Microstructure on the Dielectric Strength of Vacuum Contact

真空触头成分及超微结构对其耐电压强度的影响

The Microstructure of the Digestive Organ of the Chick Embryo

北京白鸡5～18日龄胚胎消化器官的显微结构

Requirements of purity degree , surface quality and microstructure for steel for cord arc strict.

帘线钢对纯净度 、 表面质量、金相组织等要求十分严格.

SiC was prepared with siliceous colliery waste, quartzite, anthracite coal and weakly caking coal by Acheson process. The microstructure of siliceous colliery waste was investigated by SEM.

分别以硅质煤矸石、石英砂与弱粘煤、无烟煤作原料用Acheson工艺合成了SiC，并研究了硅质煤矸石的微观结构。

Boron carbide coatings were deposited via vacuum plasma spraying, and then their microstructure, phase composition, hardness and bonding strength were examined.

本文采用真空等离子喷涂方法制备碳化硼涂层，对涂层的结构、组成、硬度及结合强度进行了观察与测定。

The effects of different granularity proportion and volume fraction of WC grains as wear resistant phase on microstructure and abrasiveness of composite alloy were studied by experiment. The research results were then applied to wear resisting supporting roller and disc pad used in middle speed coal crusher.

试验研究了耐磨相WC颗粒的不同粒度配比和体积分数对复合合金组织及耐磨性的影响，并将研究结果应用于中速磨煤机耐磨辊胎和盘瓦。

The microstructure analysis indicate that the nanowires are β SiC with face centered cubic structure.

对纳米线进行结构分析表明，本方法制备的纳米线为面心立方结构的βSiC。

Relationship Between Microstructure of Left Ventricle and Cyclic Variation of Myocardial Ultrasonic Backscatter Integration

左心室壁显微结构与心肌背向散射积分周期变化的关系

The compose and microstructure of intermetallic compound after temperature cycling test are also observed by scanning electron microscope ( SEM).

通过扫描电镜（SEM）对温度循环试验后焊球金属间化合物（IMC）层和剪切强度试验后的断裂面进行了形貌、结构和组分的观察及分析。

Through the process test 、 wearing test and microstructure observation and analysis, the convention performance of oxygen-acetylene flame spray welded layer is studied.

通过工艺试验、耐磨试验和显微组织观察分析，研究了氧-乙炔火焰喷焊层的常规性能。

The abrasive mechanism of rolled white cast iron with various matrixes are studied by investigating the microstructure, abrasive surface and mechanical properties of specimens.

通过对不同基体组织轧制白口铁的金相组织、磨损表面和机械性能的分析，研究了具有不同基体组织轧制白口铁的磨损机理。

The deformation rate of magnetic pulse forming is 100-1000 times as that of the Quasi-static forming, and magnetic pulse forming can expand the forming limit of metallic materials effectively and lead to a series of improvements in materials' mechanical properties and microstructure.

磁脉冲成形的变形速率为准静态成形的100-1000倍。能显著提高金属的成形能力，同时，可使材料从微观组织到力学性能产生一系列的改变。

Research on the hot forming method with microstructure controlling

基于组织控制的热成形方法基础研究

Effect of laser scanning speed on phase constitution, microstructure, microhardness and wear resistance of laser-cladding stellite hard facing alloy by using of across-flow-stype CO_2 laser of power 1. 5 kW has been investigated.

本文报导应用横流式连续CO2激光器，采用不同激光扫描速度，对熔覆Stellite12钴基硬面合金的合金层的相组成、微观组织结构对耐磨性和显微硬度影响的研究结果。

Heat treatment can improve the wear resistance and hardness of the electroless composite plating. The existence of composite particle does not influence the microstructure of the coating.

化学复合镀层的性能受涂镀条件的影响，复合颗粒不影响镀层的微结构。

The recrystallization microstructure and texture evolution during this process also can be well explained by Basal Plane Grain "Remain" Mechanism.

此过程中的再结晶组织及织构演变同样可以利用基面残留机制很好地解释。

Comparison of Microstructure of Bermuda Grass in Different Substrates

狗牙根草在不同基质上生长的显微结构比较

Heat treatment process has great influence on the microstructure and binding strength of the interfaces.

热处理方式对粘结层的显微结构、粘结强度有明显影响。

Technique, such as electronic probe, XRD, optical microscope, micro-hardness and macro hardness test, are applied to investigate the microstructure, phase structure, and analyze the alloy element distribution of metallurgical bonding layer and the material mechanical property changes.

利用电子探针、XRD、光学显微镜、显微硬度和宏观硬度测试等手段，研究扩散件试样的显微组织、物相结构，分析冶金结合层中合金元素分布和材料内部力学性能变化。

Effect of water toughening temperature on microstructure and properties of super-high manganese steel with trace boron

水韧处理温度对含硼超高锰钢组织和性能的影响