modulus的例句大全

It has been proved by the investigation that the filling effect of the confined expansion makes the reduction of holes in concrete as well as the increase of strength and elastic modulus of concrete.

实验证明：由于约束膨胀的填充作用，大幅度降低空隙率及孔径，定将有效地提高混凝土的弹性模量及强度。

Properties of n-th completely linear subgroup on modulus of congruence class ring

模m同余类环生成的n阶完全线性子群的阶的计算

The paper presented the definition and properties of n-th completely linear subgroup on modulus of congruence class ring, and calculated the formula of factorial.

文中给出了模m的同余类环上的n阶完全线性子群的定义及性质，利用子群进行分类，通过陪集的计数定理，给出了其阶的计算公式。

Meanwhile, the influences of lime dosage ratio, consolidation ratio, and frequency on elastic modulus were investigated.

同时还针对掺灰比、固结比以及频率等影响因素进行了深入研究，得出了下列的结论：石灰土的动弹模量随应变水平的变化规律与粘土基本一致；

Based on tensile testing for different width specimens of geotextiles, the relationship between specimen width and breaking strength, breaking elongation, lateral contraction, strength of fixed elongation and elasticity modulus were analyzed.

通过对土工织物不同宽度的拉伸试验，分析了土工织物试样宽度与断裂强度、断裂伸长率、侧向收缩率、定伸长强度、弹性模量之间的关系。

Convex modulus depicted overall degree of convexity of the unit sphere of spaces. It was very different for degree of convexity of each point that it would produce very great influence on the whole feature of the spaces.

凸性模刻划了空间单位球面的总体凸性程度，但是每一点的凸性程度都有很大的不同，这将会对空间的整体性质产生很大影响。

Scissors Model Error of Oedometer Index and Its Correction by Chord Modulus

Oedometer试验指标的剪刀型错误及用弦线模量的改正

Cell-size has a significant effect not only on the crushing stress and plastic modulus of aluminum foam, but also on the strain-rate sensitivity of material of this kind.

泡孔尺寸不仅影响着材料的屈服强度和塑性模量等，还影响着材料的应变率敏感性。

The test results show that the longer the time of moist curing, the higher the values of compressive strength, splitting tensile strength, elastic modulus and critical stress intensity factor.

试验结果表明，抗压强度、弹性模量、抗拉强度以及临界应力强度因子随标准养护时间的增长而增大，弹性模量对养护条件的敏感性最大。

Analysis of Backlash in Spring Anti-backlash Small Modulus Gear Drive Train and Its Engineering Application

弹簧消隙小模数齿轮传动链回差计算分析及工程应用

Investigation of influence factors on bending modulus of carbon fiber/? Epoxy

碳纤维/环氧复合材料弯曲模量影响因素的研究

Adding GF increased not only tensile strength and bending modulus but also impact strength of the composite.

GF的加入不但提高了材料拉伸强度、弯曲性能，而且提高了其冲击强度；

Bending modulus of CF/ KF hybrid composites are on the rise with carbon fiber volume fraction increasing.

CF/KF混杂复合材料的弯曲模量随着碳纤维相对体积分数的增加而呈上升的趋势。

Through analyzing the temperature field and stress field of typical steel castings some casting parameters as modulus, the distance of feeding head, cold iron are validated and modified, which is in accordance with the production-lines.

通过选取典型的铸钢件，采用实验的方法，对温度场、应力场、模数、冒口补缩距离、外冷铁等铸造工艺参数进行验证并加以修改，使其符合生产实际。

The young's modulus, strength and breaking strain of carbon materials

炭素材料的弹性模量、强度和破坏变形率

Results showed that with the increase of flame retardant additives, the breaking strain, tensile strength and elongation at break declined, but the elasticity modulus increased.

结果显示：随阻燃剂添加量增加，体系的扯断应变、拉伸强度、断裂伸长率下降，弹性模量增大。

For gas bearing sandstones , Lame constant will reduce and shear modulus increase.

获得了莺歌海盆地砂岩纵、横波速度关系.

The results show that the maximum elastic specific energy in the wall of coal roadway is almost directly proportional to the square of digging depth and almost inverse proportional to the elastic modulus.

结果表明，煤层巷道两帮煤体中弹性比能的最大值与采深的平方近似成正比，与其弹性模量近似成反比。

For most materials the modulus of elasticity in compression is the same as in tension.

对于大多数材料来说,受压缩与受拉伸的弹性模量是相同的.

In this paper, the efficient quadratic isoparametric boundary element and the multi-region technique were adopted to solve the macroscopic elastic modulus of a biphase medium with random order.

本文采用高效率的二次等参边界元及子域法求解了随机双相介质的宏观弹性模量。