mold的例句大全

At least 3 years plastic part design or injection mold design relative work experience.

三年以上塑料件设计或注塑模具设计相关工作经验.

I plant for a number of appliance enterprises to provide sophisticated injection mold.

我厂为多家小家电企业提供精密注塑模具.

Hardware undertake various plastic mold for the design, manufacture and injection, fuel injection, screen, and printing.

承接各种塑胶五金模具的设计 、 制造及注塑 、 喷油 、 丝印 、 移印.

From the mold material processing, design, assembly, test mode full-service.

从模具材料加工 、 设计 、 装配 、 试模 全方位 服务.

Scribe contour gauge design of monolithic agricultural type mold

整体式农用轮胎模具的划线样板设计

Optimization of Casting Process Design of 14 ″ Conic convex mold Castings for Glass shell of Tv Tubes

14英寸显像管玻壳锥凸模铸造工艺的优化设计

The Influence of Resin Content on the Thermal Properties of Shell Mold Sand

树脂添加量对壳型覆膜砂热性能的影响

The characteristics of copper alloy Mold process and its effect on the properties of ductile iron and gray iron castings are presented in this paper.

本文介绍了铜合金金属型的特点及其对所生产的球墨铸铁件、灰铸铁件性能的影响；

The theory and practice of flux cover in mold teeming

模注保护渣的理论与实践

Bulk Cu_ ( 50) Zr_ ( 42) Al_ ( 8) coniform amorphous samples ( 10 mm in bottom diameter and 80 mm in length) were successfully prepared with water-cooled copper crucible and cooper mold suck cast.

采用水冷铜坩埚-铜模吸铸法成功制备了底部直径10mm、长度80mm的Cu50Zr42Al8圆锥形块体非晶试样。

Select water-cooled copper mold and graphite crucible as the reaction vessel, and set different welding current and duration of preparation.

氩弧熔化时分别选用水冷铜模和石墨坩埚做反应容器，设置不同的焊接电流和持续时间。

The manufacture process was improved from the first cold bonding-post curing to primary cure by using the mold having chevron cell, and the adhesion strength between the chevron type of pattern and the belt body was improved, and the conveyance capability was significantly increased.

制作工艺由起初的冷粘合二次硫化改进为在硫化机上加装人字花纹模具一次整体硫化，提高了花纹和带体间的粘合强度，明显地增加了输送带的输送量；

WEDM ( Wire-Cut Electrical Discharge Machining) is a kind of special machining way which is usually used for mold fabricating, formed cutter tooling and complex and precision shapes, etc.

电火花线切割加工（Wire-Cut Electrical Discharge Machining，简称WEDM）属特种加工，通常用来切割轮廓曲线比较复杂的零件，如：模具、成形刀具等，对加工精度有较高的要求。

Present Situation and Application Prospect of Reclamation Techniques of Returned Sand from Sand Mold Casting in China

我国砂型铸造中旧砂再生技术现状及应用前景

The Mold Design of Portable Battery Charger Bottom Case Injection Moulding

便携式电池充电器底壳注塑成型模具设计

Cavity is an important part of the continuous extrusion machine, it has contact with extrusion wheel, billet and mold, temperature distribution is under complex conditions which directly affects the production efficiency and the quality of the products.

连续挤压机腔体是连续挤压机的重要组成部分，它与挤压轮、坯料、模具均有接触，工况条件下温度分布变化复杂，直接影响连续挤压生产的效率和产品质量。

Method and Application of Manufacturing Hydroxy Acid from Used Oil for Mold and Core Sand Binder

废油制作羟基酸型（芯）砂粘结剂的方法与应用

Method and application of manufacturing hydroxyl acid from used oil for mold and core sand binder is introduced. These oil include motor oil, insulating oil, diesel oil, turbine oil, cylinder oil, etc.

介绍了一种用机械油、绝缘油、柴油机油、汽轮机油、汽缸油等各种废油制作羟基酸的方法及其作为型（芯）砂粘结剂的应用。

The principle and characteristics of magnet injection molding are explained and its key technologies are analysed from magnetic particulate, plastic binder and mold, process.

并且在磁性颗粒塑料粘结剂、模具、工艺等方面分析了该工艺的关键技术。

Clinical Application of The All-covering Bionic Ear Mold Technology

全覆盖电子耳模技术的临床应用