mold的例句大全

The temperature distribution along the graphite mold during SPS was systematically studied.

系统研究了温度梯度场SPS烧结时的模具内部温度场分布规律.

Research on Automatic Design System for Injection Mold Base Based on CBR

基于事例的注塑模架自动设计系统的研究

Design and Manufacture of Injection Mold for the File Box

文件盒注射模设计与制造

The mold design method of screen of camera scene was introduced.

介绍摄像机镜头显示屏注塑模的设计方法.

Silica sol ceramic mold is prepared by using the colloidal casting processing technique.

采用胶态成型技术制备硅溶胶陶瓷型.

Comparison between BFC and conventional mold filling simulation method is conducted by several simulation examples.

通过算例比较了BFC方法与基于笛卡尔正交网格方法的各自特点.

Study of Mold Cone Angle of Hydraulic Briquetting Press Based on ANSYS

基于ANSYS的生物质液压成型模具锥角优化

Weekly maintenance: no oil leakage or exudation at the mold closing cylinder, and the feed opening alignment shall be accurate and without injury.

周保养：合模油缸无漏油，渗油，模具入料孔对位准确无损。

Will you provide the engraving content of the plate of this mold to us? When will you send it?

模具上铭牌上的刻字内容是由你们提供吗？你们什么时候可以这些刻字资料。

Application of Phosphate Bonding Agent to Art Casting in Ceramic Mold

磷酸盐粘结剂用于陶瓷型艺术铸造

In our country, the most serious strawberry diseases are Gray Mold, Powdery Mildew, Leaf Spot ( snake eye), Fusarium Wilt, Bud Blight, Root Rot, and so on.

我国为害草莓较严重病害有草莓灰霉病、白粉病、叶斑病（蛇眼病）、枯萎病、芽枯病，根腐病等。

Set up the acceptable quality standards for injection mold parts.

建立模具、注塑件的质量接受标准.

The structural design of pressing mold of plastics Bocce

地掷球压制模的结构设计

Injection molding standard mold base system is developed for injection molding conceptual design.

开发了面向模具概念设计的注塑模标准模架库系统.

Blowholes in the Steel Casting Produced in Lime Sand Mold

关于石灰石砂铸钢件的气孔

The structure of a banana-shaped submarine gate in injection mold is introduced.

介绍了注塑模中一种象“香蕉”形状的曲线型潜伏式浇口的结构形式.

Division is specialized in manufacturing and injection mold products processing joint venture!

我司是一家专业模具制造和注塑产品加工的合资企业!

Stamping die, injection mold, die-casting molds, and other series.

冲压模具, 注塑模具, 压铸模具等其他系列.

So it is possible to apply it to any complex injection mold.

因此应用它到任何的复杂注入模子是可能的.

Introduced choice principle of parting surface and attentions in designing injection mold.

介绍了模具设计时分型面(或称分模面)选择原则和注意事项.