molding的例句大全

The resista nce decreases intensely when the slenderness ratio of the hot molding sand layer increases.

阻力随干砂层长细比的增加而急剧减小.

Injection molding machine process controlling, optimisation and trouble-shooting.

注塑工艺控制 、 改良及注塑问题解决.

Pulsating-pressure-induced injection molding technology and equipment were introduced and analyzed.

介绍脉动压力诱导塑料制品注射成型技术以及实现该技术的塑化注射装置.

Suitable for all kinds of polyurethane ( PU ) foam molding products.

适合各种聚氨脂 ( PU ) 发泡成型产品.

Preforms are blow molded on conventional, unmodified blow molding machines, according to PTI.

瓶坯的吹塑常规, 未修改的吹塑机, 根据公共交通交汇处.

It preliminarily studied the extrusion molding technique of engineering plastics ( PA ).

初步研究了工程塑料尼龙 ( PA ) 的挤压成型工艺.

During low seasons, preforms could still be produced for blow molding during high seasons.

淡季生产的瓶坯可在旺季吹成瓶子.

Polyvinyl chloride ( PVC ) is a heat-sensitive polymer resin, with degradation during molding.

聚氯乙烯 树脂是一种热敏性树脂, 在加工过程中容易受热分解.

Pits are formed in the polycarbonate disk by an injection molding process.

坑形通过注塑工艺在聚碳酸脂盘面形成.

The optimization measures are given for the common defects of PMMA injection molding products.

并针对PMMA注塑制品常见缺陷提出了工艺优化措施.

The platens are the important parts of clamping system in injection molding machine.

模板是注塑机合模机构的重要零件.

Resin graphite composite plate using poly ( phenylene sulfide ) and synthetic graphite was prepared by hot-pressure molding.

以 聚苯硫醚 树脂和人造石墨为原料一次模压成型制备双极板复合材料.

The molding filling process is a very important phase in RTM.

树脂充模是RTM工艺成型过程中的重要一环.

Therefore, place molding is one of in Commercial Pedestrian Street landscape design important contents.

因此, 场所空间的塑造是商业步行街景观设计中的重要内容之一.

This paper addresses the Transfer Molding ( RTM ) process. The governing equations of resin flow are presented.

介绍了RTM工艺过程 及特点,给出了树脂渗流控制方程.

Successfully apply ate in Forging, welding, cutting, laser, molding, glass iron, tooling, printing and moving industry.

REIS机器人系统已成功应用于:铸造 、 焊接 、 切割 、 激光技术 、 注塑 、 玻璃涂胶 、 模具制造 、 喷涂、搬运等众多领域和行业.

When possible, the regrind source shall be the scrap generated by the molding process in question.

在可能时, 再研磨来源应由有关成型过程中产生的废料.

It is composed of four tracks peel-roll, double-roller ( printing, cutting ), molding and reclaiming material.

本机由四道轧皮和双辊 ( 印花 、 切割 ) 成型、余料回收等机构组成.

Polyphenylene sulfide ( PPS ) missile-borne radome is developed by means of injection molding.

采用注射成型的方法制备出某弹载聚苯硫醚 ( PPS ) 天线罩.

QCS is automatic stretch blow molding machine used in two-setp bottle production line.

QCS半自动 系列吹瓶机是一种两 步法 半自动吹瓶设备.