plastic的例句大全

In this paper, the elastic buckling influence coefficient yae is computed by the theorem of elasticity, while the plastic buckling influence coefficient γ ap is calculated from test data. NONLINEAR ELASTIC BUCKLING OF CYLINDRICAL COMPOSITE PANELS UNDER AXIAL LOAD

本文依据弹性理论得出柱弹性弯曲影响系数γα（？）复合材料圆柱曲板在轴压下的非线性弹性稳定问题

The results demonstrated that WPU plastic would be an ideal vascular casting material.

结果表明WPU是一种较理想的微血管铸型材料。

The purpose of this paper is to study the applicability of thermal processed fuel oil ( hereafter called waste plastic disposal or WPD) to diesel engines using low quality fuel oil.

通过一系列实验对废塑料油在柴油机上的燃烧特性及适用性作了实验研究，并着重研究了废塑料油对排气产物的影响。

A kind of elastic plastic modulus of soils in the deep excavation pit is presented, and a WHP back analysis model and the displacement prediction method of retaining wall are given.

提出了一种深基坑开挖弹塑性有限元分析模型以及建立在该模型基础上的WHP反演算法和预报方法。

After liquid phase sintering, the WCu composites have been deformed by hot hydrostatic extrusion and subsequent hot extrusion, during which the plastic deformation of tungsten particle is not obvious.

通过对W-40wt%Cu液相烧结坯进行一次热静液挤压和后续的热挤压变形的实验，发现钨铜材料在一次挤压和二次挤压后，其钨颗粒并没有明显的大的塑性变形。

Application of VSL Plastic Bellow and Determination of Its Friction Coefficient

威胜利塑料波纹管的应用与其摩阻系数的测定

Study and application of VCI plastic film

气化性防锈塑料薄膜的应用研究

Scarlett Johansson and Duchess of Cambridge have the perfect NOSE: Plastic surgeons say the ideal shape is upturned at 106 degrees

美国女星斯嘉丽·约翰逊和凯特王妃拥有最完美的鼻子：正是整形医生所说的106度完美鼻形！

In this paper, TPX plastic mould for Casting of for epoxy resin have been introduced.

介绍了一种用于环氧树脂浇铸成型的新型塑料模具。

Experiment indicated that TPX mould was an ideal plastic mould for casting of epoxy resin which was suitably curing at high or middle temperature.

实验表明它是一种适用于高、中温固化环氧树脂浇铸成型的理想的塑料模具。

Degradation of plastic and rubber in SCW is feasible on technique.

研究表明，超临界水降解塑料和橡胶技术，从工艺方面讲是可行的。

Comparison of Elastic-Plastic FE Method and Engineering Method for RPV Fracture Mechanics Analysis

反应堆压力容器断裂力学分析中弹塑性有限元方法与工程方法的比较

Effects of Repeated Plastic Working ( RPW) on Structure and Properties of SiC_p/ AZ31 Magnesium Matrix Composites

反复塑性变形对SiC p/AZ31镁基复合材料组织和性能的影响

Making use of J-A_2 three-term solution characterizing the crack-tip stress field of elastic-plastic material combining with RKR cleavage model, three equations are given by matching the different crack-tip fields.

本文采用弹塑性裂纹尖端应力场的J-A2三项解描述裂纹尖端的约束效应，并对材料的微观断裂机理和弹塑性裂纹扩展的过程做了分析；

QSP INDUSTRIAL CO., LTD is devoted to producing the special and accurate fasteners and other machined turned components used by other plastic industries.

我们致力于生产特殊、高精密的扣件及其他塑胶工业使用的车修零件。

In recent years, with the development of modern manufacturing, materials and processes are required for the continuous improvement. Quick plastic forming ( QPF) technology of magnesium alloy have become a hot spot in manufacturing.

随着现代制造业对材料和工艺要求的不断提高，近年来镁合金的快速气压胀形工艺已成为加工界的热点。

Prospect of plastic media blasting ( pmb) process in aviation industry of China

浅谈塑料介质喷射除漆技术在我国航空工业的应用前景

Elastic-Plastic Solution for an Axisymmetric Plane Stress Problem in MVM Material

MVM材料轴对称平面应力问题的弹塑性解

In this paper, the corrosion property of NZS system decorative copper alloy under different plastic deformations is investigated, and the influences of grain size and annealing temperature upon the corrosion property discussed.

着重研究了NZS系列装饰铜合金在不同塑性变形下的腐蚀性能。同时对晶粒度、退火温度对腐蚀性能的影响做了一定的探讨。

It is found that the dominant mechanism of material removal of precision grinding for nWC/ 12Co coatings is mainly the inelastic deformation including plastic deformation with a certain amount of pulverization, and less removal from material brittle fracture.

结果表明：在大多数磨削条件下，nWC/12Co磨削的材料去除机理主要是非弹性变形方式，即以塑性变形为主，伴随一定的材料粉末化，材料较少以脆性碎裂去除。