polyacrylamide的例句大全

In this paper, different alcohol and polyacrylamide dissolved in guar gum solution, looking forward to an increasement of solubility, thickening efficiency and scope by the introduction of alcohol molecules or polyacrylamide polymer.

本文将不同的醇和聚丙烯酰胺溶解到瓜尔胶高分子水溶液中，期待通过引入醇类分子或者聚丙烯酰胺高分子与瓜尔胶高分子之间相互作用来提高瓜尔胶高分子的溶解性能、增稠效率和使用范围。

But the macromolecule amphoteric polyacrylamide effecting on the drainage was much worse than that on retention.

但高分子的聚丙烯酰胺的助滤效果远不及助留效果好.

Amphoteric polyacrylamide as paper reinforcer was synthesised with G-acrylamide , acrylic acid , nitrile, accelerant-MPA as raw materials.

以丙烯酰胺、丙烯腈 、 丙烯酸和促进剂MPA为原料合成两性聚丙烯酰胺纸用增干强剂,并讨论了各反应条件对产品性能的影响.

Flocculation of Klebsiella cell broth with cationic polyacrylamide flocculants was studied.

采用有机絮凝剂阳离子型聚丙烯酰胺对克雷伯菌菌悬液进行絮凝处理.

The modifying effects of polyacrylamide on road performance of cement concrete bridge deck overlay are studied.

研究了聚丙烯酰胺对水泥混凝土桥面铺装层路用性能的改性效果.

Secretary for trade companies mainly engaged in trade clothing, seamless steel tubes, and cation polyacrylamide products.

我司为贸易型公司主要经营外贸服装 、 无缝钢管 、 及阳离子聚丙烯酰胺产品.

Objectve To conclude the experience on polyacrylamide hydrogel ( PAM-HG ) injection for augmentation mammoplasty in 18 cases.

目的聚丙烯酰胺水 凝胶 注射隆乳18例经验总结.

Objective To study the issues related to surgical removes of polyacrylamide hydrogel injection for augmentation mammaplasty.

目的:探讨与聚丙烯酰胺水凝胶注射隆乳物取出术相关的问题.

Results All the symptoms disappeared completely and the effect were satisfaction aftermovement of polyacrylamide hydrogel.

结果所有病例症状较术前有明显好转,效果满意.

Conclusion The result confirmed that the polyacrylamide hydrogel is a good tissue filling agent at present.

结论聚丙烯酰胺水凝胶是目前较理想的填充材料.

Objective Cytotoxicity study of the residual amount of acrylamide monomer in different concentrations in polyacrylamide hydrogel.

目的研究不同浓度丙烯酰胺单体在聚丙烯酰胺水凝胶中残留量的细胞毒性。

This paper dealt with polyacrylamide gel electrophoresis ( PAGE ) of lactate dehydrogenase ( LDH ) isoenzymes in fish.

本文对用聚丙烯酰胺凝胶电泳 ( AGE ) 离鱼类乳酸脱氢酶 ( DH ) 工酶的技术进行了研究.

Five blood protein loci ( Alb, Pro, Tf, Prt, Hb ) of 40 Xinjiang Tianshan Wapiti were detected by vertical polyacrylamide gel electrophoresis.

采用垂直板聚丙烯酰胺凝胶电泳技术, 分析了40头新疆天山马鹿的血清白蛋白(Alb), 前白蛋白 ( Pro), 转铁蛋白(Tf ),前转铁蛋白(Prt),血红蛋白(Hb)5个蛋白座位的基因型频率 、 基因频率和群体遗传变异指标,以便为天山马鹿选种选配繁育工作提供理论依据.

Urea coated with copolymer of polyacrylamide and polyacrylate had greater capabilities than those with polyacrylate.

控/缓释性能与高吸水性树脂的类型、吸水倍率及用量有关.

STP profile control hard-gel is made up of polyacrylamide, cross-linking agent and retardant.

STP强凝胶调剖剂由聚丙烯酰胺 、 交联剂 和延缓剂组成.

The properties of the viscosity of polyacrylamide ( PAM ) solution were investigated ubbelohde viscometer and rotation viscometer.

利用乌氏粘度计和旋转粘度计研究了聚丙烯酰胺 ( PAM ) 溶液的粘度.

Through homopolymerization posthydrolysis process, the partially hydrolyzed polyacrylamide ( PAM) with super-high relative molecular weight is synthesized by two-stage polymerization method and bifunctional initiator initiates the polymerization, and the effects of polymerization and hydrolysis technical parameters on the relative molecular mass are studied.

选择均聚后水解工艺，采用双官能度引发剂和二段聚合法合成了部分水解超高相对分子质量聚丙烯酰胺；考察了聚合工艺参数和水解条件对聚丙烯酰胺相对分子质量的影响。

Using acrylamide as monomer and by homopolymerization posthydrolysis procedure, the polyacrylamide with relative super-high moleculer weight is synthesized for oil driving in oil field.

考察了水解剂、水解温度、水解时间、水解剂用量等因素在后水解过程中对聚合物相对分子质量的影响。

Acrylamide Monomer is a very low-level residual by-product from the manufacture of polyacrylamide ( PA) gel that is commonly used in some of the products to help create the ideal thickness and feel.

丙烯酰胺单体是生产聚丙烯酰胺胶质所产生的残留物，而聚丙烯酰胺胶质（PA Gel）是一种令产品产生质感的常用成分。

With K2S2O8/ Na2SO3 as initiating agent, the hydrophobic association polyacrylamide derivates were synthesized by copolymerization of acrylamide, cation monomer and substituted ethylene monomer with dispersion polymerization and got nanoparticles ( diameter 60-80nm).

在过硫酸钾/亚硫酸钠（K2S2O8/Na2SO3）催化作用下，利用分散聚合的方法，合成丙烯酰胺、阳离子单体与取代乙烯基单体共聚疏水缔合衍生物，产物粒子均匀，直径60～80nm。