polymer的例句大全

The extensional viscosity when polymer solution passing the size-varing pores is considered into Darcy viscosity, rebuilding the effective viscosity model in the Darcy Law.

把聚合物溶液通过拉伸&收缩的孔道时所表现的拉伸粘度，考虑到达西粘度中，重新建立了达西公式中的有效粘度模型。

During the production of plastic film through casting method, the cooling process of molten polymer which is extruded from the extruder die determines the quality and performance of plastic film.

流涎法生产塑料薄膜的过程中，从挤出机模头挤出的熔融聚合物的冷却过程决定着塑料薄膜的质量与性能。

The growth of glioma cell can be inhibited by BCNU-PLA controlled release polymer.

用BCNU-PLA进行局部化疗可有效抑制胶质瘤细胞的生长。

12.2 Use the XCD polymer as the viscosifier and fluid loss additives in mud.

在泥浆中用XCD生物聚合物作为提粘剂和降失水剂。

A Logging Method for Polymer Injection Profile. WLT, 1993;

聚合物注入剖面测井方法探讨，测井技术，1993；

In this paper, we established a wormlike chain ( WLC) model with variable local persistence length to study polymer molecules with different bending stiffness at each point.

本文针对链上各点处弯曲刚度不同的聚合物分子，建立了变持续长度蠕虫链（WLC）模型。

Studies on the Two Class Glass Transition and the Typical VTF Behaviour of an Amorphous Comb Polymer Electrolyte

无定形梳状高分子固体电解质的二重玻璃化转变及典型VTF特征

S Research on the response of the conveying and extrusion power of the polymer melt to the vibration force field ( VFF) was carried out with self amended Tanner constitutive equations.

本文采用自行修正的Tanner本构方程研究了塑料电磁动态塑化挤出机中熔体输送挤出功率对振动力场的响应。

A designed organic compound of triazine thiols monosodium ( TTN) was used for preparing polymeric film ( PTT) on pure copper by polymer plating.

通过有机镀膜的方法，利用一种自设计合成的三嗪硫醇化合物（TTN）在铜。面制备有机薄膜。

Preparation of Basic Polymer of RTV Silicone Rubber of Condensed Type

缩合型室温硫化硅橡胶基础胶料的制备

Thiourea or sodium thiosulfate can reduce polymer degradation in RPW solutions.

硫脲和硫代硫酸钠均可减轻污水溶液中聚合物的降解。

A modified RBZ molecular theory model for entangled polymer network is proposed in this paper.

本文对缠结网络聚合物体系提出了一种RBZ分子理论的修正模型。

The effects of polymerization conditions in gas phase and the formulation and preparation of the chromium based polyethylene catalyst QCP 01 on catalyst activity and polymer melt flow index were investigated.

考察了聚合条件以及催化剂配方和制备工艺条件对气相法铬系聚乙烯催化剂QCP－01的聚合活性及产物熔体流动指数的影响。

New Polymer Quenchant PQA and Its Application in Aluminium Alloy Quenching

PQA新型聚合物淬火剂在铝合金淬火中的应用

Z-scan Measurement on the Third-order Nonlinear Optical Absorption of Conjugated PPQ Polymer Film

共轭有机高聚物PPQ薄膜非线性吸收的Z-扫描测量

A maize field experiment was conducted on PCU made by macromolecule polymer coat technology and their fertilizer efficiency compared to common urea.

通过田间试验，研究了该包膜尿素对春玉米产量、氮素表观利用效率的影响，并进行了经济效益分析。

MSQ-PP particles possessed narrower size distribution compared with DQ-PP particles owing to the uniform size distribution of MSQ catalyst particles, suggesting the effective control of polymer particle size with MSQ catalyst.

MSQ-PP的粒径分布比DQ-PP窄，说明MSQ催化剂在控制聚合物的粒径方面较好。

Retanning agent MBN of complexing polymer

分子复合聚合物复鞣剂MBN

Only the monomer and polymer of RD 6G exist in the solution before the transient point of γ-lgC curve.

研究认为，在γ-lgC曲线的转变区前，只有单体和聚合体存在，没有胶束。

FTIR and Py-GC/ MS methods for analysis of polymer

FTIR及Py-GC/MS定性分析高聚物单体