process的例句大全

The main parameters composition and purpose of CKD_ ( 8E) locomotive braking resistor were provided. The process of design was described, and the points for attention in design were given.

介绍了CKD8E型机车制动电阻装置的主要技术参数、构成和作用，陈述了全部设计过程，强调了设计中应重点解决的问题和注意事项。

Equipment and Process on Producing Moldy Bran for Vinegar

食醋生产用麸曲制作设备与工艺操作

Through investigation of mixing ratio, culture temperature, humidity, culturing time and ventilated air quantity of wheat bran medium in solid brewery fermentation, an optimum fermentation process was found to prepare a novel type of moldy bran crude enzymic preparation.

在固态酿酒发酵中，通过考察麸皮培养基的配比、培养温度、湿度、培养时间及通风量等，确定了制备新型优质麸曲粗酶制剂的最佳发酵工艺。

By controlling the condition of the anodized process, the special AAO template with branched channel structures can be formed because of the unstable growth of the membrane. This may provide a new opportunity for fabricating Y-shape or T-shape nanowires and nanotubes by using the template method.

充分利用这种不稳定生长特性，通过控制AAO模板的阳极氧化条件，可得到具有分枝孔道结构的特殊模板，这为利用模板法制备各种Y形或T形纳米线、管提供了新的发展空间。

Analysis of experimental characteristic for explosion and termination of branched chain reaction in process vessels

化工容器中支链反应爆炸和终止实验特性分析

Branching factor of search process

搜索过程中的分支系数

Crack defection, crack branching and whisker bridging process may also contribute to the increase of fracture toughness.

断裂韧性的增加是由于裂纹偏转、裂纹分支和钉扎等作用引起。

Effects of the liquid structural change on crystallization orientation were investigated. It is found that the melt after the liquid structural change preferably grew on the high index crystal plane with the solidification process, which was responsible for the branching of low index single crystal plane.

液-液结构转变对晶体生长取向的影响主要是随凝固长度增加，液-液结构转变使合金实现高指数晶面取向，加剧了低指数晶面分支现象。

The Model and Existence of Branching Process in Random Environment

随机环境中的分支过程的模型及存在性

The Controlled Branching Process with Random Control Function in Random Environments

随机环境中具有随机控制函数的受控分枝过程

Properties of Probability for Linear Controlled Branching Process in Random Environment

随机环境中线性控制分枝链的概率性质

This paper studies the extinction of branching process in varying environments.

本文研究变化环境下分枝过程与灭绝有关的几个基本性质。

The linear controlled branching process in random environment

随机环境中的线性控制分枝链

Application of Branching Process in Epidemic Modeling

分支过程在传染病模型中的应用

Combination Process of Al_2O_3 Ceramic/ Steel Using Braze Welding Method in Air

复相A12O3基陶瓷/钢在大气中直接钎焊的连接工艺

Improvement of High-frequency Induction Brazing Process for Brass and Stainless Steel Tube

黄铜与不锈钢管高频感应钎焊工艺的改进

By using this process, the wettability is obviously improved between the hard metal and the liquid state silver brazing flux and copper brazing flux.

采用这种方法可以明显改善硬质合金与液态银钎料和铜钎料的润湿性；

For both aluminum alloy and magnesium alloy, a sound joint can be obtained under appropriate welding conditions using the process method of ultrasonic brazing.

采用一定的钎料对铝合金、镁合金进行超声波钎焊能较好提高其接头力学性能。

The Key of Technology Steps for Hot Box Core Making Process

热芯盒制芯的关键工艺环节

Commentary on Various Coke making Process and No Recovery Coke Oven Batteries

对各种炼焦工艺及无回收焦炉的评述