process的例句大全

The dried film wet lethostigma into the process of drying or curing often called.

这个由湿漠变成干膜的过程常称为干燥或固化.

This paper reported the industrialized process of canned pork and taro ( lipo ) and determined the technological parameter.

研究了 荔浦 芋扣肉罐头工业化生产的加工工艺,确定了加工参数.

In the paper, based on the deformation theory, the author deduces the distribution regularities of strain, thickness of plate and real stress in the deforming region through analyzing stress and strain in the round hole burring process

通过对圆孔翻边应力应变分析，应用全量理论，推导出了变形区应变、厚度及变形时材料真实应力的分布规律

A new hollow shell formation method, the reverse bending process, is presented.

介绍了一种新型管坯成型方法 —— 反弯成型法.

Milling grooves on aerospace rocket engine-nozzle surface is an important process.

铣槽加工是大型航天火箭喷管制造中的关键工序.

It is prepared with slurry polymerization process and supported CT catalyst.

采用淤浆聚合工艺,利用负载型CT催化剂制得超高相对分子质量聚乙烯.

The compounds of the process are considered to be dinitrimines.

本法的化合物应是二硝亚胺.

From this change, we can see from Li Wei Bei-kai of the evolution and maturation process.

从这一变化中, 能使我们看到魏碑由隶化楷的演变和成熟过程.

Results: The optimum process is water decoction method: adding 10 times amount of water, decocting for 2 times, 1.5h each time.

结果：最佳工艺为水煎法，提取时间1.5h，提取次数2次，加水量10倍。

There is too many bureaucracy involved in the whole registration process.

在整个注册过程中有太多官僚式的繁文褥节.

Brief introducing glutinous corn production and the point of each technology in machining a process.

简要介绍了糯玉米生产及加工过程中各项技术的要点.

The V-anvil drawing process of large forgings was simulated using FE software, and the stress-strain distributions in the plastically deforming area were compared after different V-anvils drawings.

利用有限元软件模拟了V型砧的锻造拔长过程，并对不同夹角的V型砧压下后锻坯塑性变形区内应力、应变的状态进行比较。

The development of stamping/ extrusion tool includes design, process and trial run. This assembly language output listing is useful as a debugging aid.

冲压与拉伸模具的设计开发和工艺设定与调试。这种汇编语言输出表是支持调试的有用工具。

Start Apache with the-X parameter, which forces it into a single-process debugging mode.

使用-X参数启动Apache，这个参数将强制Apache进入单进程调试模式。

The process following debugging of a computer routine, to verify that the software and/ or the hardware is functioning properly.

计算机程序经过排错后进行的一项工作，用以验证软件和/或硬件工作是否正常。

Structure and Working Mechanism of Rolling Decanting Tank in SBR Process And Its Application

SBR滗水器的结构原理及应用

Wearing sunglasses is necessary to prevent cataracts and to limit the effects of the aging process on your eyes.

在必要的时候，佩戴太阳镜可以预防白内障和有限度地减少对你的眼睛的老化进程所带来的影响。

Physical Modeling of Vacuum Degassing Process in RH Reactor

RH真空脱气动力学过程的物理模拟研究

Theoretical Analysis on Nitrogen Removal during Vacuum Degassing Process and its Industrial Application

钢液VD真空处理脱氮理论分析及其应用

Numerical Simulation on Molten Steel Flow and Circulation Flow Rate in RH Vacuum Degassing Process

RH精炼过程钢液流动行为与循环流量数值模拟