resin的例句大全

An acid-proof high water-absorbing resin was prepared from acrylamide as monomer, K_2S_2O_8 as initiator, and N, N'-methylene-bis-acrylamide as crosslinking agent by aqueous solution polymerization and then by sulfonation reaction.

以丙烯酰胺（AM）为单位，K2S2O8为引发剂，N，N′-亚甲基双丙烯酰胺为交联剂，进行水溶液聚合，再对产物进行磺化反应，制得耐酸性高吸水性树脂。

The organic black matrix material, formulated by a photosensitive acrylic resin and color pigments, has superb optical performance with a specular reflection of 0.36% at 30 ° incident angle.

由光敏丙烯酸树脂（Acrylic Resin）与颜料制成的有机黑矩阵材料具有卓越的光学性能。在30°入射角下其镜面反射率为0.36%。

Conclusions: The compound Blood Resin capsules can significantly increase coronary blood flow in isolated hearts of guinea pigs and antagonize the reduction of coronary blood flow caused by posterior pituitary hormone.

结论：复方血竭胶囊能显著增加冠脉流量，拮抗垂体后叶素收缩冠脉减少冠脉流量的作用。

The catalysis of big pore strong acid resin for 1,4-butanediol dehydration to tetrahydrofuran is investigated.

考察了大孔强酸性树脂对1,4 丁二醇 脱水制四氢呋喃的催化作用.

Useing unsaturated urethane , 2-ethylhexyl acrylate, crosslinking agent, high oil-absorbent resin was prepared by suspension polymerization.

用不饱和氨基甲酸酯 、 丙烯酸异辛酯和交联剂, 以悬浮聚合的方法制备高吸油性树脂.

The toughening mechanism of epoxy resin using silica powder toughened by coating membrane was also discussed.

分析了微裂纹的形成与扩展,探讨增韧硅微粉对环氧树脂的增韧机理.

The results show that polyetherimide toughen this resin system, but improve the dielectric performance.

研究表明,聚醚酰亚胺在改善氰酸酯树脂体系韧性的同时, 也提高了树脂体系的介电性能.

General should be treated with oil modified alkyd resin for me tog on innovative ink.

凡是宜用油改性醇酸树脂拆开料为宾的油不朱.

After the failure of the resin, the structure changes from beam to cable.

树脂破碎之后, 结构形式由原来的梁变成索.

The modified resin was applied to brake block, and the frict.

将桐油改性酚醛树脂制成刹车片, 测试其摩擦磨损性能.

This is referred to as a thixotropic property of the resin.

这种特性叫做树脂的触变性.

The curing process of thermosetting resin matrix composite materials involves complex mechanical, thermal and chemical reactions.

树脂基复合材料的热固化成型是一个力 、 热与化学反应相互耦合的过程.

Polyester and acrylic acid is the most common thermosetting coating resin.

聚酯和丙烯酸是热固性涂层中最常见的树脂.

Made from thermoset acrylic acid resin and high-grade melamine resinwith weather resistant color, organic solvents and addictives.

由热固性丙烯酸树脂及高级三聚氰胺树脂,配以耐候性颜料 、 有机溶剂和助剂精制而成.

A trademark used for a transparent thermoplastic acrylic resin employed in paints, enamels and primers.

卢塞特树脂一种透明热塑料丙烯酸树脂的一个商标,这种树脂用于油漆 、 搪瓷、雷管中.

Moreover , the COPNA resin possesses good thermo-stability and high coke value.

COPNA树脂具有很好的耐热性和较高的炭收率.

Domestic production of automatic valve port packager for PVC paste resin

PVC糊树脂阀口自动包装机国产化

Structure: Wound inmeta 11 ized polyester film, epoxy resin dip sealed.

结构: 采用金属化酯薄膜卷绕而成, 环氧树脂包封.

An Selective Study of Compounding Varnish and Auxiliaries by Blending acrylic Acid Resin and Ammoniac Alcohol

丙烯酸树脂与氨醇树脂共混配制清漆及其助剂的选择研究

Problems of selection of raw materials and layout of equipment and process bewared in design of resin-bonded sand shops are introduced and rationalization proposal set forth.

介绍了树脂砂车间工艺设计中选择原材料、设备和工艺布局时应注意的问题，并提出了一些合理化建议。