seam的例句大全

Use mirror surface welding technology to ensure welding seam smooth, and reduce material remained.

采用镜面焊接技术,确保焊缝光滑平整, 减少产品残留.

The result shows that stress intensity factor of calculated of thickness of welding seam.

给出了数值解法计算模型,研究了焊口厚度对焊口应力集中系数的影响.

Inspection welding seam and dimension of cargo hatch cover.

货舱舱口盖焊缝和尺度检查.

Excellent dynamic characters stable arc elegant shape of seam.

本机动特性好,电弧稳定,焊接成型好.

In the thin seam fully-mechanized mining face, three machines assortment must be scientific and reasonable, the structure and size of all equipments must reach the most optimistic composition condition.

薄煤层综采机械化工作面三机设备配套要科学、合理，各设备的结构尺寸要达到最优化的配合状态。

Other passengers were very narrow the room with a seam.

其他乘客都很配合的让出一条窄窄的缝.

The core of ground control theory in shallow seam is roof structure and its stability.

浅埋煤层岩层控制理论的核心是顶板结构及其稳定性.

It was shown that: ( 1) The different welding parameters have considerable effect on the microstructure homogeneity of welding seam and the HEZ as result of block ferrite in certain weldings by different heat inputs and cooling conditions.

结果表明，（1）不同的焊接工艺参数对焊缝和热影响区的组织均一性有较大影响。因为热输入及冷却条件的差异会使焊缝中形成粗大的块状铁素体；

Relationship Between the Dart and Side Seam of Cheong-sam

旗袍空间省量分配与侧缝形态关系

Temperatures Automatic Control System of HFW Welded Pipe Seam

高频焊管焊缝的温度自动控制系统

Ultrasonic tandem method is usually adopted to detect the weld seam of a high pressure container in which dangerous flaws exist, such as boundary unblended and crack.

高压容器的焊缝常存在边界未熔合、未焊透、裂纹等问题，一般利用超声波串列扫查方法对焊缝进行无损检测。

Combining mining not only improve the throughput but although avoid the destroying to the unmined coal seam;

联合开采不仅仅可以提高生产能力，而且可以避免分别开采造成未采煤层的破坏；

To prevent seam impressions.

防止缝线压痕.

The Baie exploration area of 10~# coal seam of CBM exploration

白额勘探区10~煤层煤层气初探

The fine welding seam can be gotten using continuous VEB welding technology.

采用连续式真空电子束焊接技术可以得到优良的焊缝.

Finally, micro-characteristics of SHS welding joints, formation of seam and shape of crack section are discussed.

讨论了SHS焊接接头显微结构特征, 焊缝的形成过程及断口形貌等等.

Through designing and making simulation block for EBW seam , the ultrasonic C-scan testing method is studied.

设计制作电子束焊焊缝模拟对比试样, 利用模拟对比试样研究超声C扫描检测工艺.

The ultrasonic C-scan testing method is used in detecting electron beam welding ( EBW ) seam.

采用超声C扫描技术检测结构件的 电子束 焊焊缝.

Failure analysis in unde ( ? ) on the br ( ? ) ak of flash welding seam of rail.

对钢轨闪光焊缝脆断做了失效分析.

Probing into Construction Technology for Flank Bore in Special Seam

特殊顺层探放水钻孔施工工艺探索