simulation的例句大全

Numerical simulation and experimental investigation of multiple-irradiation laser bending process of thick steel plate were presented.

采用数值模拟和实验研究分析了厚钢板激光多次扫描弯曲成形过程中弯曲角度与激光扫描次数之间的关系.

Simulation of the Effect of Reheating on Temperature and Stress Fields of Hot Roller Steel Specimen

预热对热轧辊钢试样堆焊温度场和应力场影响的数值模拟

Simulation and Optimization on Inventory of Distribution System Using Theory of Constraints

基于整合约束理论的配送系统库存仿真优化研究

Simulation and analysis of meso-b vortex over middle reaches of the Yangtse River on 22 July 1998

1998年7月22日长江中游中β低涡的数值模拟及分析

Simulation of the Spray Booth Flow Field of Painting Line with Solidworks

基于Solidworks的涂装线喷漆室流场仿真分析

Simulation for the Design and Optimization of Dust Collection Box of Highway Sweeper

公路清扫车集尘系统仿真设计与优化

The phase transformation and microstructure of a C-Si-Mn TRIP steel during continuous cooling after ausforming were studied by hot simulation experiment machine. The continuous cooling transformation curves were drawn using thermal dilation method, and the influence of the cooling rate on the microstructure was analyzed.

利用热/力模拟试验机研究了C-Si-Mn系TRIP钢在不同连续冷却条件下的组织变化情况，用热膨胀法绘制了动态CCT曲线，分析了冷却速度对组织的影响。

VOF model was applied to3D numerical simulation and calculation of the dike dam project at the confluence of Daduhe River and Nanyahe River arid its influencing regions.

采用VOF模型对大渡河与楠桠河交汇处的护堤工程区及其影响范围进行了三维数值模拟计算分析。

Parameters Optimization and Experiments of Potato Digger Blade Based on Computer Simulation

基于计算机模拟的挖掘铲参数优化与试验分析

Numerical Simulation for Atmospheric Diffusion Wind and Concentration Field in Mountain Area

山区大气扩散风场及浓度场的数值模拟

It has designed the simulation disk intelligence dynamic management system, the main cording diagram dynamic management system, the power dispatch load report management system, the power dispatch information order bill management system, the network information issue system and the network Java curve data browsing system.

设计了模拟盘智能动态管理系统、主结线图动态管理系统、电力调度负荷收报管理系统、电力调度信息令票管理系统、网络信息发布系统、网络Java曲线数据浏览系统。

Design and Simulation of Temperature Controller for Calcining Zone of Rotary Kiln

回转窑煅烧带温度控制器的设计与仿真

The Technical Optimization Design of Numerical Simulation for the Blade Stamping Process of a Large Concrete Mixer Truck

混凝土搅拌车叶片冲压成形工艺的有限元数值模拟优化设计

Research on the Performance Simulation and Fault Diagnosis of Diesel Dynamo

柴油发电机组性能仿真与故障诊断研究

On Design and Realization of Modular Structure of Turbocharged Diesel Engine Cycle Simulation Program

涡轮增压柴油机循环模拟程序模块化结构的设计与实现

Study on the Graphic Turbocharged Diesel Engine Cycle Simulation

涡轮增压柴油机图形化循环模拟技术研究

High speed diesel engine cycle thermodynamic simulation research by means of dual crank conrod mechanism

双曲柄机构高速柴油机工作循环热力学模拟研究

The modular structure design and realization for turbocharged diesel engine cycle simulation program have been studied and stated in detail in this paper.

对涡轮增压柴油机循环模拟程序模块化结构的设计与实现进行了详细的研究和论述。

Study on Dielectric Property with Temperature Based on the Molecule Simulation Technique

基于分子模拟的二氧化硅介电常数温度特性规律的研究

Study on numerical simulation and efficient numerical method of complex turbulent flow in conical diffuser

复杂压力梯度流动的管路内紊流计算机仿真及高效算法研究