simulation的例句大全

On the Research of Optimal Algorithm of Simulation Model of DEDS

离散事件动态系统（DEDS）仿真的最优算法研究

In this paper three dispersion management system: dispersion management soliton ( DMS) system, dense dispersion management soliton ( DDMS) system and dispersion-decreasing fiber ( DDF) soliton system were investigated by numerically simulation.

对常规色散管理孤子系统（DMS）、密集色散管理孤子系统（DDMS）、色散渐减光纤（DDF）孤子系统进行了数值模拟研究和分析。

Based on the idea of Distributed Interactive Simulation, the paper presents a design of Display Controlled SubSystem ( DCSS) in virtual cockpit.

采用分布式交互仿真的思想，介绍了一种应用于虚拟座舱的显控系统的设计方法。

By using modified Shell model numerical simulation of the autoignition process on pilot fuel was made.

采用经过修正的Shell模型，对引燃油的着火过程进行了数值模拟；

The paper analyzes the performance of DCMA series protocol by simulation.

文章通过仿真对DCMA协议的性能进行了分析和比较。

Computer simulation proves that DCMA is more robust than SR-CMA and more computationally efficient than CMA, and its residual mean-square error is lower than that of CMA and SR-CMA.

仿真结果表明，DCMA的计算效率高于CMA，算法稳定性优于SR-CMA，而且可以获得较低的剩余均方误差。

Simulation of Characteristics for GaAs IC DCFL Gate and Circuit Design

GaAs IC逻辑单元与或非DCFL特性计算机示波器方式模拟及电路设计

The simulation results show that the algorithm realizes high bandwidth utilization, low end-to-edn delay, and effectively improves the QoS of EPON compared to DBAM.

我们对TDBA算法进行了仿真，仿真结果表明，TDBA可以达到高的带宽利用率，低时延，低轮询消耗，提高了网络的QoS。

Principle of designed DAGC and results of simulation are analyzed in paper.

对所设计的DAGC原理和仿真结果进行了分析。

The effectiveness of CFMS to the EMI ( Electromagnetic Interference) suppression of switching converters was then investigated. Moreover, the principle of the suppression of EMI noise by CFMS was analyzed and a simulation model for component-level circuits was constructed.

文中探讨了混沌频率调制技术在开关变换器中抑制电磁干扰的效果，分析了混沌频率调制抑制EMI噪声的原理，并建立了元件级电路仿真模型。

These include the simulation of full-scale ship wake distribution in water tunnel and pressure measurement in the case of cavitating propeller on the dummy model by using pressure transducers as well as the expression of the experiment results and analysis method.

这包括在水筒内模拟实船伴流，测定在空泡情况下的脉动压力，试验结果的表达及分析方法。

Modeling and Simulation of an FMCW Radar for Measuring Coal Level

FMCW雷达系统在测量煤粉仓料位中的建模及其仿真

LMS method was suggested to estimate FETF for single pulse measurement. The computer simulation results have shown that LMS method is much better than empirical FFT method.

对于单脉冲激励的测量方法，我们建议采用LMS估计方法，计算机模拟结果表明LMS方法优于经典的FFT方法。

Simulation results confirm that the average access delay of FDPA is reduced, and the mean time to failure is increased, comparing to the random placement strategy and the CRUSH method.

实验结果表明，与典型的随机放置算法和CRUSH相比，FDPA的平均访问时间更低，平均无故障时间更长。

This method is simple in calculation and fast in search velocity, which proves quite effective through simulation test.

该算法计算简单，搜索速度快，通过仿真试验发现，用该方法规划的路经取得了比较好的效果。

It is shown from computer simulation that FCCN has rather high efficiency concerning concurrent processing in local information network systems.

计算结果证明FCCN在信息局部性系统中具有比较高的并行处理效率。

The interconnection among multi-protocol intelligent field instruments and the performance simulation evaluation in the interconnection system are implemented by establishing the Quasi Timed Petri Nets model of Field Communication Control Device ( FCCD).

针对多协议现场通信控制装置FCCD，从理论上建立了FCCD系统的类时间Petri网模型，实现了多协议智能设备的互连及其系统的性能仿真评价。

A general purpose FBM ( Functional Block Module) based Instrumentation& Control Layer is constructed and control strategies in most chemical process simulation projects can be built using the 10 kinds of FBMs produced in this project.

构造了一个基于通用仪表功能块（FBM）的仪表控制层，通过构造10种通用的仪表功能块，可以实现大多数化工工艺仿真项目的控制策略。

The mathematical analysis and simulation results demonstrate that CCOP can significantly reduce response delay and energy consumption when compared to other cooperative caching policies.

数学分析和仿真结果表明CCOP在与其他协作缓存策略比较时可显著降低响应延迟和能量消耗。

The code restriction technique and clipping are combined to achieve higher PAPR reduction and better BER, which can be seen from the simulation results of CCDF and BER based on MATLAB.

基于MATLAB的互补累积分布函数和误码率的仿真结果表明，码元约束技术和传统限幅的结合不仅降低了高峰均功率比，而且很好地改善了误码率性能。