simulation的例句大全

Simulation Study on Mechanical Vibration Deicing Equipment for Transmission Lines

输电线路机械震动除冰装置仿真研究

The result of experiments and of the simulation show that the new type of aircraft deicing fluid instant heating system, with shorter preparing time and less energy cost, is satisfactory for its precise control and antijamming property.

试验与仿真结果表明，新型飞机除冰液快速加热系统较老式系统准备时间短，工作更节能，并有良好的精度及抗扰动性能。

Numerical Simulation of Cellular/ Dendrite Arm Spacing Selection During Unidirectional Solidification of Ti-Al Alloy

Ti-Al合金定向凝固过程中胞/枝晶间距选择的计算机模拟

Research of simulation dendritic growth of xenon by phase field method;

研究了相场方法在纯物质凝固生长过程中计算模拟的应用。

Dendritic Growth Simulation of Polycrystalline for Pure Material by Phase Field Method

相场法模拟流动下纯物质多晶粒枝晶形貌研究

Dendritic crystal growth was generated via basic physical model and combined temperature field simulation.

本文使用元胞自动机模型根据最基本的物理学原理和温度场模拟计算耦合，得到了枝晶的生长结构。

Since the theory of dendritic crystal growth was not considered in the simulation, these result were some special result under special conditions.

由于本模型没有引用微观研究中关于枝晶的特殊理论，因此可以将这种结果看做是通用模型的一种特殊情况。

Analysis and Simulation of BCLS for Parameter Identification

偏差校正最小二乘法参数辩识的分析和仿真

We define a transitional system for deterministic process, and show the soundness and completeness of process simulation.

我们给出了确定性进程的转换规则，并证明了确定性进程单向模拟的正确性与完备性。

Deterministic simulation models establishing and performance analyzing for land mobile satellite communication channel

陆地移动卫星通信信道确定性仿真模型分析

Deterministic Simulation Model for Mobile Fading Channel

移动衰减信道确定性的仿真模型

It is not economical and maybe brings about negative control effects to make control strategies by deterministic simulation with typical conditions and faults according to conservative principles.

按典型的工况和故障的确定性仿真及保守原则制定控制策略，其决策不但不经济，还有可能带来危险的负效应。

The paper establishes the deterministic simulation model using the theory of sine summation. The model parameters are determined using the Method of Equal Distances and the Method of Equal Areas.

用正弦和理论建立了信道的确定性仿真模型，并用等面积算法和等距离算法确定了模型的参数。

Deterministic computer simulation is widely used in science and technology.

确定性计算仿真在科学研究和工程技术中的应用非常广泛。

Then the lattice hydrodynamic model with the onramp system is proposed and the stochastic and deterministic onramp simulation methods are designed.

随后提出了匝道系统的格子流体力学模型，并设计了随机型和确定型匝道两种数值模拟方法。

Moreover, the invariants of the stress deviator were employed to analyze the metal deformation process of ring compression and hydro-bulging toroidal shell by numerical simulation, and also the simulated and experimented results have a good agreement.

并且通过数值模拟的方法，采用偏应力张量不变量对圆环压缩和环壳液压胀形过程中金属的变形进行了分析，模拟结果和实验现象一致。

Simulation test study on sludge centrifugal dewatering in urban sewage treatment plant

城市污水厂污泥离心脱水模拟试验研究

Mathematical Model for Ester Interchange Tower& the Simulation of Distillation with Reaction

聚酯酯交换塔的数学模型&反应精馏塔的模拟计算

Multi-phase field simulation of unidirectional solidification for binary eutectic alloys

二元共晶定向凝固的多相场法数值模拟

Trends Dynamic Simulation of the Eutectoid Transformation of Nodular Cast lron

球墨铸铁共析转变组织的动态模拟