simulation的例句大全

In the HLA simulation world, FOM construction is increasingly important for HLA expansion.

在HLA仿真领域中, FOM的开发对于HLA的推广十分重要.

Based on the signal disposing simulation system of discontinuous and continuous wave radar, this paper analyzes and discusses the interface technology for Visual C++ and engineering language Matlab from different points of view.

以间断连续波雷达信号处理仿真系统为背景，从不同角度分析和研究了Visual c++与工程计算语言Matlab的接口技术。

Elaborating on the significance of developing simulation systems for electric CBCs both in theory and in practice by summarizing recent researches and application of computer simulators throughout the world and by analyzing present training condition for CBC operators.

本文通过对国内外计算机仿真训练器的研究及应用情况总结，以及我国港口集装箱起重机司机培训现状和分析，阐述了在我国研究岸边集装箱起重机电控与操纵仿真系统的理论意义和现实意义。

Simulation results confirm that the average access delay of FDPA is reduced, and the mean time to failure is increased, comparing to the random placement strategy and the CRUSH method.

实验结果表明，与典型的随机放置算法和CRUSH相比，FDPA的平均访问时间更低，平均无故障时间更长。

This method is simple in calculation and fast in search velocity, which proves quite effective through simulation test.

该算法计算简单，搜索速度快，通过仿真试验发现，用该方法规划的路经取得了比较好的效果。

It is shown from computer simulation that FCCN has rather high efficiency concerning concurrent processing in local information network systems.

计算结果证明FCCN在信息局部性系统中具有比较高的并行处理效率。

The interconnection among multi-protocol intelligent field instruments and the performance simulation evaluation in the interconnection system are implemented by establishing the Quasi Timed Petri Nets model of Field Communication Control Device ( FCCD).

针对多协议现场通信控制装置FCCD，从理论上建立了FCCD系统的类时间Petri网模型，实现了多协议智能设备的互连及其系统的性能仿真评价。

A general purpose FBM ( Functional Block Module) based Instrumentation& Control Layer is constructed and control strategies in most chemical process simulation projects can be built using the 10 kinds of FBMs produced in this project.

构造了一个基于通用仪表功能块（FBM）的仪表控制层，通过构造10种通用的仪表功能块，可以实现大多数化工工艺仿真项目的控制策略。

The mathematical analysis and simulation results demonstrate that CCOP can significantly reduce response delay and energy consumption when compared to other cooperative caching policies.

数学分析和仿真结果表明CCOP在与其他协作缓存策略比较时可显著降低响应延迟和能量消耗。

The code restriction technique and clipping are combined to achieve higher PAPR reduction and better BER, which can be seen from the simulation results of CCDF and BER based on MATLAB.

基于MATLAB的互补累积分布函数和误码率的仿真结果表明，码元约束技术和传统限幅的结合不仅降低了高峰均功率比，而且很好地改善了误码率性能。

3-D SOLID Model of Finite Element Simulation Analysis in Thermal Deformation of CBGA Assembly

CBGA组件热变形的3-D SOLID模型有限元分析

At first, the CBCT projection data was simulated with computer simulation technology.

首先，运用计算机仿真技术模拟出锥束CT投影数据；

The simulation results show that the performance improvement of proposed algorithm is superior to conventional differential demodulation by 1.4 dB at a BER of 10-4 in AWGN channel.

仿真表明，相对于软判决译码时传统的差分解调，该算法在误比特率BER为10-4时在AWGN信道中有1.4dB的性能改善，在Rician信道中同样有显著的性能改善。

High-speed 3 D graphic simulation: it can show a preview before process.

快速三维图形仿真功能,可在加工前预览效果.

Generated source, channel coding, modulation, channel transmission, demodulation, channel decoding, error comparison of the communication process of the Simulink simulation.

信源产生、信道编码、调制、信道传输、解调、信道译码、差错比较等通信过程的Simulink仿真方法。

Then digital image simulation results and analysis have been presented for supermode sampling.

然后对超模式采样计算机图像仿真结果进行了分析。

The conclusion was verified by simulation signals with different noise intensity and rolling bearing's defect vibration signal. Analysis shows that the proposed method is more effective than direct modulation or time delayed autocorrelation demodulation in denoising or clarifying modulation information.

不同噪声强度仿真数据和滚动轴承故障振动信号实验数据分析表明，该方法比直接解调或仅采用时延相关解调更能有效抑制噪声，凸现信号调制信息。

Computer simulation studies show that the CAED algorithm gives an improved approach to estimating the time delay with α-stable noises under the lower MSNR.

通过计算机仿真对比实验验证了该算法在强脉冲噪声、低信噪比情况下的优良估计性能。

Analysis and simulation of optical cavity in CAEP far-infrared FEL

远红外自由电子激光光腔改进的模拟分析

LMS method was suggested to estimate FETF for single pulse measurement. The computer simulation results have shown that LMS method is much better than empirical FFT method.

对于单脉冲激励的测量方法，我们建议采用LMS估计方法，计算机模拟结果表明LMS方法优于经典的FFT方法。