sintering的例句大全

Ternary boride based cermet cladding material was prepared by in situ reaction and liquid phase sintering technology in vacuum furnace.

在真空烧结炉中通过原位反应液相烧结工艺制备出三元硼化物基金属陶瓷覆层。

Current Research for Low Temperature Sintering of Boron Carbide Ceramics

碳化硼陶瓷低温烧结技术的研究现状

Research Development of the Reaction Sintering on Boron Carbide

反应烧结碳化硼的研究进展

Improving body briquetting pressure could promote densification of nanometer-level aluminum nitride, but such influence gradually became weak with improvement of sintering temperature.

提高坯体成型压力可以促进纳米级氮化铝烧结致密化，但此影响伴随烧结温度的提高而逐渐微弱。

Nanostructured bulk of W-Cu alloy was prepared by mechanical alloying and hot pressed sintering.

在真空电炉中利用机械合金化和热压烧结法制备出纳米晶块体钨铜合金.

Qualitative and Quantitative Theory of Enhanced Sintering in Powder Metallurgy

粉末冶金强化烧结的定性与定量分析理论综述

The special results of BaTO 3 ceramics ( BTO ) are presented by microwave sintering.

本文报道了微波烧结BaTiO_3陶瓷的初步研究结果.

The effects of donor doping amount, cooling conditions after sintering and oxidation temperatures on the semiconductivity of SrTiO_3 have been studied.

研究了施主掺杂量，烧成后的冷却条件、氧化温度对SrTiO3半导化的影响。

Common donor dopants are Y 3+ and Nb 5+ Usually donor doped content lies in range from o 2 to 0 3 percent Factors influencing on the content are purity of used raw materials, flux for sintering, donor doping process and the others.

常用的施主加入物是Y3＋和Nb5＋，施主掺入量一般控制在x＝0.2%～0.3%为宜。影响施主掺入量的因素有原料纯度、烧结助剂、掺入施主的工艺等。

The multiple component sintering additive can also play double effects during preparing BN/ AlN composites, and plays important role on promoting densification process and improving property.

复合烧结助剂在制备BN/AlN复相陶瓷过程中同样可起到双重效果，对促进材料的致密化和改善材料性能起到了重要的作用。

Research and Practice on Lead Updraught Sintering with Oxygen-enriched Air

富氧鼓风铅烧结焙烧研究与实践

The biphasic ceramics composed of PZN based and BT based constitutes were prepared by two phases mixed sintering method.

用两相混合烧结法制备了PZN基和BT基复合的复相陶瓷。

The experiment results indicated that the complete perovskite structure is obtained when the sintering temperature is about 1200 ℃ of the PCZ ( 0.33) ceramic prepared by solid oxide.

实验发现，用固相法制备的PCZ（0.33）的陶瓷在1200℃左右烧结时可以得到的完全钙钛矿相。

A Study of Atmosphere Sintering Technique for KTN Ceramics by Sol Gel Method

用Sol-Gel法制备粉料及KTN陶瓷烧结研究

The exhaust system draws out the dust and harmful gas in sintering process.

钢铁厂的铁矿烧结车间用抽风系统将生产过程混入空气中的粉尘和有害气体抽走.

Sintering temperature has also great influences on fracture characteristic and properties.

烧结温度对断口形貌和力学性能也有较大影响.

This paper analyzes application of long bag pressure pulse filter in cement, electric steelmaking and sintering.

客观详实地介绍和分析了长袋低压脉冲袋式除尘器在水泥 、 电炉炼钢、烧结行业除尘系统中的应用状况.

Solidcircuit breaker This production is that copper-tungsten and copper bar as one through casting sintering.

本产品采用烧结熔铸的方法将粉末冶金铜钨合金与铜棒融为一体.

Cerium-tungsten and AIN ceramics pieces with high density were obtained by the hollow cathode plasma sintering.

空心阴极烧结工艺可制备出致密度高,导热性能好的AIN陶瓷和较高致密度的铈钨样品.

Research and Practice of Updraught Sintering Technique for Lead Concentrate

铅鼓风烧结技术的研究与实践