solidification的例句大全

Formed by solidification from a molten state . Used of rocks.

由熔化的岩石凝固形成的.

At this point, the whole of the same air as the solidification.

此时, 整个空气像凝固了一样.

The numerical modeling of solidification process is moving from macro-to micro-modeling.

凝固过程的数值模拟正在由 宏观 向微观转变.

High quality amorphous metals and alloys are made by rapid solidification technique.

性能优异的非晶态金属和合金是用急冷凝固技术制取的.

Meanwhile, the higher HDPEC discharge is beneficial to modification of solidification structure.

同时, 脉冲充电电压越高,凝固组织细化程度越大.

And the reaction rate the precipitate solidification is also discussed.

最后探讨了固化沉淀的反应速率.

Casting temperature have a little effect on the solidification end location.

浇注温度对铸坯的凝固末端位置也有一定影响.

Rapid solidification technology can improve organization and properties of magnesium alloys.

快速凝固技术是改善镁合金组织结构、提高镁合金各项性能的重要技术.

In winter, it's easy on solidification, glazing products surface brightness film UN-uniform.

不夏季, 上平油很容易固结, 上平产物的暗不天亮膜不平均.

Commonly, solid-liquid interfaces are planar, columnar or dendritic interfaces during solidification.

凝固时的固液界面通常为平面 、 胞状、枝晶状.

Architecture, according to Goethe, " is the solidification of music. "

歌德说, 建筑是 “ 凝固的音乐 ”.

Otherwise, the solidification structure for different superheat was simulated.

在此基础上还模拟了不同过热度下铸坯的凝固组织.

A solidification simulation software for pressure die casting processes has been developed.

应用自行开发的低压铸造凝固模拟软件模拟低压铸造铝合金轮毂的凝固过程.

The heat of fusion is equal to the heat of solidification.

熔解热等于凝固热.

Effect of wave pulse current on solidification of ZA 27 alloy is studied.

研究了方波脉冲电流对ZA27合金凝固组织的影响.

The improved model was applied to simulate the dendritic features, in the cases of the free dendritic growth from an undercooled melt, competitive columnar growth in the directional solidification and equiaxed dendritic evolution.

应用改进的模型模拟了不同择优取向的单枝晶在过冷熔体中的自由生长、定向凝固过程中柱状晶的竞争生长以及等轴晶的演变过程。

The solidification microstructure of the stainless steel layer was typical coarse cellular dendrite crystal epitaxially from the mother sheet, and after rolling it changes to the fine equiaxed crystal.

凝固层轧制前为逆热流方向外延生长的粗大胞状树枝晶，轧制后为细小的等轴晶组织。

In the process of metal solidification, the numerical simulations of the dendritic crystal growth is an important part of materials science field. Its result is practical guiding significance to effectively control the growth of metal materials.

在金属凝固过程中，对枝晶生长过程的数值研究，是当今材料学领域的一个重要分支，其研究结果对有效地控制金属材料的生长过程有一定的实际指导意义。

Influence of side ultrasonic treatment on solidification characterization of Al-Si eutectic alloy

侧部导入超声处理对共晶Al-Si合金凝固特性的影响

Multi-phase field simulation of unidirectional solidification for binary eutectic alloys

二元共晶定向凝固的多相场法数值模拟