spalling的例句大全

The wear mechanism of alumina is brittle fracture as well as grain spalling.

偶件氧化铝的磨损机制主要是脆性断裂及晶粒剥落.

Moreover cracks were observed on cross section near coating surface, which causes spalling of coating.

但在断面上出现平行于涂层外表面的裂纹.

The wear mechanism corresponding to the maximum resistance is the micro-cutting + small gouging hole + light spalling.

最佳耐磨性时的磨损机制为显微切削+浅小凿坑+轻微剥落.

There is a tendency of intercrystalline corrosion and spalling corrosion for Aluminum-Lithium alloys in corresponding medium.

铝锂合金在相应的介质中存在晶间腐蚀和剥蚀倾向,组织结构不同导致合金的腐蚀性能不同.

These versatile laminates provide extremely high impact resistance and absorb total impact energy without spalling.

这些通用板材具有高抗冲击性,能吸收所有冲击能量而不碎裂.

Spalling was a major form of contact fatigue failures in nitriding steel.

氮化钢的主要接触疲劳破坏形式是剥落.

It has been shown that fatigue spalling is the main wear mechanism, abrasive wear also exist.

结果表明,渗层磨损机制以疲劳剥落为主, 兼有磨粒磨损.

It is showed that materials parameters have dramatic effect on spalling.

发现材料参数对于爆裂有很大影响.

Its main wear mechanisms are plastic smearing, abrasive wear and fatigue spalling.

其磨损机理主要有塑性涂抹 、 磨粒磨损和疲劳剥落.

The results are compared with observation of crack growth and spalling.

存在的是平面的、小的次表面裂纹.最后将计算结果与实际观察的裂纹生长剥落情况对比.

The of amount of fine graphite enhances the roll's resistance ot spalling, thermal crack and wearability.

加上有少量细小,不仅提高了轧辊抗剥落性, 抗热裂性和耐磨性能,而且辊身工作层硬度落差很小.

The wear is the oxidizing one and spalling which has two modes: brittle and fatigue.

剥落有脆性剥落和疲劳剥落等两种形式.