steel的例句大全

The results show that the microstructure of the steel obtained after cooling is proeutectoid ferrite, eutectoid ferrite from the austenite, a little carbide-free bainite, granular bainite and martensite.

结果表明，该钢在冷却过程中组织均为未溶的先共析铁素体、从奥氏体中析出的共析铁素体、少量的无碳化物贝氏体、粒状贝氏体和马氏体。

By Cr microalloying, the fore eutectoid ferrite eduction is restrained, the distance between rows of pearlite is decreased, then the tensile strength, section shrinkage and drawing property of high carbon steel wire rod is obviously raised and improved.

高碳钢中加入的铬元素抑制先共析铁素体析出，减小珠光体片层间距，可明显提高抗拉强度，提高断面收缩率，改善线材的拉拔性能。

Theoretical Model of Transformation Superplastic Diffusion Welding for Eutectoid Steel

共析钢的相变超塑性扩散连接

The Microstructure Evolution of Eutectoid Steel Subjected to Surface Mechanical Attrition

共析钢经表面研磨处理后微观组织的演化

Development of System for Carbon Validation of Hypo-eutectoid Steel

亚共析钢定碳软件的开发

Study of the Technological Process for Preparing Typical Eutectoid Steel Bainite Teaching Specimen

制备共析钢典型贝氏体教学试样的工艺研究

Microstructure refinement of eutectoid steel based on divorced eutectoid transformation

基于离异共析转变的共析钢组织细化

The microstructure changes of pearlitic eutectoid steel induced by cold rolling were investigated by using SEM, TEM and XRD etc.

用SEM、TEM及XRD等方法研究了共析钢中珠光体经40%-90%的冷轧变形后所产生的显徽组织变化。

In specimens of eutectoid steel T8, the cementite lamellae may be plastically deformed to some extent, and its tendency increases with the decrease of interlamellar spacing.

对于完全是片层珠光体组织的T8钢，渗碳体片层表现出一定程度的塑性变形能力，并随片层间距的减小变形能力增强。

An introduction on Union Carbide Corporation Different spheroidizing technologies were applied to the hot-rolling ultra-high carbon steel by DET ( divorced eutectoid transformation).

联合碳化物公司利用离异共析原理，采用不同的热处理工艺球化热轧超高碳钢。

Model and Application Based on Supportable Recursive Vector for Forecasting Steel Mechanics Performance

基于支持向量回归的钢材力学性能模型及应用

We saw gleaming stainless steel utensils in the kitchen.

我们看见厨房里亮晶晶的不锈钢厨具.

Ceramic utensils, ceramics for daily use items. Stainless steel tableware, kitchen utensils.

陶瓷餐具, 日用陶瓷用品. 不锈钢餐具, 厨具.

Three types of damping device for tall steel building in Japan

日本高层建筑钢结构中的三种减振装置

Concrete-filled rectangular steel tube truss transfer floor is a new kind of transfer structure and it has such merit: light deadweight, strong bearing capacity, etc.

矩形钢管混凝土桁架转换层是一种新型转换层结构，具有自重轻，承载力高，施工简单，造价低等优点。

Steel through truss bridge has some excellence, such as low girder, light deadweight, high carrying capacity, comfortable travelling crane, short construct periods.

下承式钢桁架桥具有梁高低、自重轻、承载能力大、行车平稳舒适、施工周期短等优点。

The research on odd number rock drilling hollow steel rolling process

凿岩用奇数边中空钢的轧制工艺研究

Hardfacing material of maraging steel metal powder-cored wire was deposited by pulse TIG on aluminum die cast dies to improve the dies' properties and extend its service life.

采用脉冲TIG焊马氏体时效钢金属粉芯焊丝堆焊铝合金压铸模表面来提高模具表面性能。

Numerical simulation and experimental investigation of multiple-irradiation laser bending process of thick steel plate were presented.

采用数值模拟和实验研究分析了厚钢板激光多次扫描弯曲成形过程中弯曲角度与激光扫描次数之间的关系.

Being a kind of conductor with good performance, AAAC conductor has 1% higher current capacity and no magnetic lag and turbulent loss, compared to the aluminum-cable steel-reinforced conductor of the same section.

AAAC导线是一种性能优良的导线，它与同截面钢芯铝绞线相比载流量高1%，无磁滞和涡流损耗。