steels的例句大全

This paper describes mechnical technical pata, design structure, existing problems, improvements and applications of walking beam reheating furnace for Jiuquan steels.

介绍了酒钢步进梁式加热炉步进机械的性能参数、设计特点、存在问题、改进措施以及应用情况。

A constitutive law for cyclic behavior of a class of two-phase steels

一类双相钢循环特性的研究

High nitrogen steels have the nature of high strength, good tenacity, uniform corrosion resistance and local corrosion resistance ( corrosive pitting, corrosion seam); there is no doube about its excellent nature.

高氮钢具有高强度、良好的韧性、抗均匀腐蚀、抗局部腐蚀（如点蚀，缝隙腐蚀等）性能，优异的性能勿庸置疑。

Hot dip zinc/ aluminum-plating is one of the most economic and effective protecting technologies in steels' corrosion protection in natural environment currently. However, molten zinc/ aluminum has strong corrosive nature on related equipments.

热浸镀锌／铝技术是目前防止钢铁材料在自然环境中腐蚀的最经济有效的防护技术之一，但熔融锌／铝液对热镀设备具有强烈的腐蚀作用。

Hydrogen induced delayed cracking in stable austenitic stainless steels

稳定型奥氏体不锈钢的氢致滞后开裂

The stainless steels and high nickel corrosion resistant alloys are critical engineering materials.

不锈钢和高镍耐蚀合金是重要的耐蚀材料。

By the penetration and ballistic test for different state nitrogen alloyed austenitic steels and low alloyed martensite steel, their penetration mechanism was analysed.

对不同状态含氮奥氏体钢板和马氏体钢板进行了抗枪弹与抗杆式模拟弹试验，分析了它们的穿甲机理。

Simultaneously, according to the stress-strain relationships of concrete, the confined effect from hoop steels, tie plate for bond strengthening is discussed.

同时，通过考察核心混凝土的应力-应变关系及发展过程定量探讨加强钢板、梁柱主筋及箍筋对核心混凝土的约束作用。

Characteristics of wear resistance and hardness distribution of subsurface of martensitic steels

马氏体钢耐磨性与亚表层硬度分布的关系

This paper discussed the mechanism of forming black film of the blackening system at room temperature on steels in the mixture solution of copper salt and selenious acid, and the influence factors for blackening film.

讨论了铜盐-亚硒酸钢铁常温发黑体系的发黑成膜机理和发黑膜性能影响因素。

Discussion on law of chemical composition change of electroslag remelted steels for hi pressure boiler tube making

电渣重熔高压锅炉管用钢化学成分变化规律的探讨

Surface Oxidation and Hot Brittleness of Cu-Containing Low-alloy Steels

含Cu低合金钢表面氧化及热脆

The hot brittleness mechanism and structure of surface oxide coating of low-alloy steels containing 0. 3%-0. 7% of copper have been investigated by means of hot/ cold bending tests, optical microscopy, SEM and EPMA.

用冷、热弯试验及光学显微镜、扫描电子显微镜和X射线微区分析仪分析研究了含0.3%～0.7%Cu的低合金钢表面氧化层结构及热脆机理。

A Study on the Notch Brittleness of Stress Rupture in Fe-Mn-Al-Cr Austenitic Heat-Resisting Steels

Fe-Mn-Al-Cr系奥氏体热强钢持久缺口脆性的研究

High temperature properties of continuous casting high carbon steels were measured by tensile tests with a Gleeble 1500 system and two embrittlement temperature regions of region I and region III were found.

采用Gleeble-1500热模拟试验机测量了高碳钢连铸板坯的高温力学性能，得到了第Ⅰ、第Ⅲ脆性温度区的温度范围。

So as to breach the box form structure of tradition steeliness bogie frame, it uses the cast aluminum alloy and Aluminum profile to replace steels and adopt the method of bolt joint to assemble the whole structure.

突破传统钢制构架箱形结构形式，采用铸造铝合金和铝型材对构架各梁体分别成型，然后通过螺栓进行连接。

Microstructure of large heat input welding steels with low susceptivity to weld cracking.

大线能量低焊接裂纹敏感性钢的显微组织.

Specification for welding of different steels for petrochemical engineering.

石油化工异种钢焊接规程.

The application results of the designed multicomponent cleansing agent alloy to clean steels are also discussed.

同时讨论了设计出的复合净化剂合金在各洁净钢钢种中的冶炼效果.

High-strength alloy steels can experience rapid crack propagation from stress corrosion under certain loading conditions.

高强度合金钢在一定的载荷下承受应力腐蚀会造成裂纹的快速扩展.