stiffener的例句大全

The excess slightly beyond the stiffener will be trimmed off later.

过剩略有超出了加劲将削减小康稍后.

The factors which influenced the stability of steel-lined reinforced concrete pipe with stiffener rings are discussed.

对影响带有加劲环的内衬钢管的稳定因素作了讨论.

This shows the stiffener glued to the disc.

这表明,加劲粘到光盘上.

This indicated that the fracture had initiated at the unfused butt weld in the longitudinal stiffener.

研究表明裂纹是从纵向加劲助未熔透的对接焊缝中起始的.

Study of limite ratio of height to thickness of web when stiffener is not set up on steel beam

不设加劲肋的钢梁腹板高厚比限值研究

Investigation into Elasto-Plastic Buckling Strength of Web with Longitudinal Stiffener in I-Section Girder

纵向加劲肋对钢梁腹板弹塑性屈曲承载能力影响的研究

The load-bearing condition of the steel double box girder bridge in a variety of situations was really simulated. The major parameters including the thickness of web, the stiffener density and the diaphragm density are studied.

主要研究了腹板厚度、顶、底板和腹板加劲肋间距、横隔板间距、横梁间距等结构参数对双箱钢梁承载能力和应力分布的影响。

With the restraint of flange to web considered, the buckling stress of steel beam web under different stress is analyzed. The condition for instating web stiffener is given.

考虑翼缘对腹板的约束作用分析处于不同状态下钢梁腹板的临界应力，得出腹板加劲肋的设置条件激励与约束的关系；

The performance of flat-hat Stiffeners as longitudinal intermediate stiffener is analyzed numerically by employing finite strip method in this paper.

用有限条程序对帽形中间加劲肋在单向均匀受压状态下的加劲性能进行了数值分析。

On the basis of all these analyze, a reasonable dimension limitation for the flat-hat intermediate stiffener is given, in order to provide reference for designs and the revising of design specification.

在分析基础上，论文给出了中间帽形加劲肋合理尺寸的建议，可供设计和修订设计规范参考。

A program finite strip analysis model is formed and finite strip computer software is also made in this paper. The buckling behaviors of plates with flat-hat intermediate stiffener are analyzed by employing finite strip method.

论文建立了有限条法分析模型，编制了有限条计算程序，用有限条法分析了帽形中间加劲板件的屈曲和帽形肋条的加劲性能。

The effects on buckling stress of the changes of the stiffener rigidity, shape, dimension and location, as well as the required adequate stiffening rigidity of flat-hat stiffened plates are put to analysis in details in the paper.

文中详细分析了帽形肋条的刚度、形状尺寸和位置变化对中间加劲板件屈曲应力的影响，以及帽形中间加劲板件的充分加劲刚度的计算。