strength的例句大全

Finite element analysis of casing collapse strength caused by inside worn

套管内壁磨损对其抗挤毁性能影响的有限元分析

Finite Element Analysis on Collapse Strength of Expanded Casing String

套管膨胀后抗挤毁性能的有限元模拟分析

Numerical analysis of collapse strength for casing with wear

含磨损缺陷套管抗挤强度的数值分析

Model and elasticity analysis of collapse strength of casing-cement mantle

套管水泥环组合抗挤强度模型及其弹性分析

Research on Collapse Strength of Oil Casing under Non-uniform Loads

非均布载荷下石油套管抗挤强度问题研究

Finite element analyses on synthetic factors of perforating casing's collapse strength

射孔套管抗挤强度综合因素有限元分析

The Effect of Prefabricated-Hole Parameters on Casing Collapse Strength under Non-Uniform Loads

非均匀载荷下预制孔参数对抗挤强度的影响

Under nonuniform loading, casing collapse strength decreased drastically and the radial deformation increased obviously.

不均匀载荷使套管的抗挤毁强度迅速下降，套管的径向变形显著增大；

Simplified theoretical models and analytical formulae are developed for the elastic stiffness and initial collapse strength of sandwich arches.

建立了简化的理论分析模型，得到了夹芯拱弹性刚度和初始坍塌强度的分析方程，并且与实验结果有很好的吻合。

Ffect of nonuniform loading on casing collapse strength

不均匀载荷对套管抗挤毁性能的影响

The calculation case shows that the result of collapse strength calculated by using the triaxial stress circle theory is bigger than that by other theories.

通过实例计算，对比分析了用三向应力圆理论与其他几种理论计算的抗挤强度值。结果表明，应用三向应力圆理论计算的值偏大。

In this dissertation, the collapse strength of casing with crescent-shaped wear was analyzed with finite element method as plane or spatial problem.

因此，用有限元方法分别按平面问题和空间问题研究了含新月形缺陷套管的抗挤强度；

Furthermore, plastic collapse strength, energy absorption and elastic modulus of the closed cell aluminum foam were studied in relation to cell structures.

同时，研究了屈服强度、单位体积吸收能和弹性模量与泡沫铝组织特性的关系。

Jiangzhijia Stainless Steel Products Factory, set up brand by strength, win customer by sincerity.

江之佳不锈钢制品厂, 用实力塑造品牌, 用真诚赢取客户!

Solder end valves are limited by temperatures which affect the strength of the solder joint.

焊接连接端口阀门温度限制在不影响焊接连接端口的强度范围内.

Using statistic analysis and curve fitting the correlation between compression strength and temperature was established.

利用统计分析与曲线拟合,得出了抗压强度与温度间的相关关系.

The shearing strength is one of the main indexes of rock mass.

土体的抗剪强度是土体的主要强度指标之一.

For example , high strength reinforced bars, steel medium plates, auto wheel rim steel and so on.

高拉力螺纹钢筋, 不锈钢中板, 汽车轮网钢等.

For example . high strength reinforced bar. steel medium plate. auto wheel rim steel and so on.

高拉力螺纹钢筋. 不锈钢中板. 汽车轮网钢等.

The adhesive technique with great cohesion and peel strength.

内聚强度大,剥离强度低的压敏胶粘接剂制造技术.