studied的例句大全

Curvilinear motion of a particle acted by a constant force in relativistic mechanics is studied.

研究在相对论情况下受恒力作用质点的曲线运动规律。

This paper expounded and studied the curvilinear motion of a round ring by 3& dimension vector method systematically. The motion equations of curvilinear rolling were presented.

本文对圆环的曲线滚动以三维矢量法进行了阐述与研究，并导出其曲线滚动运动方程。

Studied and simplify and refine the method of the body data cut into slices.

研究简化并提炼切片的体数据的方法。

In this work the effect of discharging conditions such as the cut-off voltage and resistance on the zinc concentration in the cathodic compartment was studied.

通过改变放电电压、电阻等条件，研究了正极区中锌浓度的影响因素。

The effects of the Jibbs'phenomenon and the phase property of the digital filter on the edges of cutoff signal with limited time domain after filtered is studied.

研究了截断信号边界的吉布斯现象及数字滤波器相位特性对有限区间信号滤波处理的影响。

By cutting different hardness concrete experiment, the cutting characteristics of the special saw with holes or different width segment have been studied.

对多孔锯片及非等间距锯片进行了锯切三种不同硬度的混凝土的实验研究。

And the main factors which influence critical tool cutting edge angle are studied, and related theory analysis are made. Furthermore, some new controlling methods and technologys to restrain or decrease the feed direction burrs in machining Processes are developed.

讨论了有关主要因素对临界主偏角的影响，进而开发出了几种抑制或减小进给方向毛刺的新工艺和新方法。

Drill cuttings are the major material for the studied samples.

研究的材料主要是钻井岩屑样品。

Process of synthesizing ACVA from cyan alcohol was studied, using sodium cyanide, levulinic acid, and A as starting materials.

对氰醇法合成ACVA的工艺进行了研究，该法采用氰化钠、果糖酸及物质A为原料。

The influences of reactant ratio, reaction temperature, reaction time on substitution reaction were studied. The better reaction conditions were obtained: molar ratio of trityl chloride and cuprous cyanide was 1:1.3, reaction temperature was at 130 ℃, reaction time was 2.5h.

并通过对原料配比、反应温度和反应时间的研究，得到了较佳的合成工艺条件：三苯基氯甲烷与氰化亚铜的最佳摩尔比为1：1.3，反应温度为130℃，反应时间为2.5小时。

In this paper determination of TOU power price is studied and three approaches are brought out: use MCP ( Market Clearing Price) to determine flat load's power price, then determine the power price of peak and valley loads;

本文对分时电价的确定进行了探索性研究，提出了确定分时电价的三种方法：用市场清除价确定平时段电价，然后在此平时段电价基础上确定峰、谷电价；

The induction time of HFC 152a refrigerant gas hydrate is studied experimentally. the relationship between induction time and air bath temperature is obtained.

对HFC152a致冷剂气体水合物结晶生成过程进行了实验研究，研究了外界环境温度对水合物结晶引导时间的影响，通过数据分析，得到了引导时间与环境温度的依变关系。

In order to decrease the irritation of Piroxicam tablets to gastrointestinal tract the preparation of Piroxicam ointment bases and their percutaneous absorption were studied.

为避开炎痛喜康片剂对胃肠道的刺激性，本文研究了炎痛喜康软膏剂的制备及其透皮吸收过程。

In this paper, a course selection model based on integer programming is studied.

研究了一个由整数规划所描述的选课模型。

The load-bearing condition of the steel double box girder bridge in a variety of situations was really simulated. The major parameters including the thickness of web, the stiffener density and the diaphragm density are studied.

主要研究了腹板厚度、顶、底板和腹板加劲肋间距、横隔板间距、横梁间距等结构参数对双箱钢梁承载能力和应力分布的影响。

The effects of endocarp, seed-coat, GA3 and stratification on seed dormancy and germination were studied with wild cherry plum.

试验以野生樱桃李种子为材料，通过用机械去壳、去种皮、低温及赤霉素对野生樱桃李种子进行不同处理，研究了不同处理对野生樱桃李休眠及萌发的影响。

What is studied in the thesis is the design about saving tax in the selling channel, which aims at analysis on tax, finding out planning point and designing on saving tax on base of the different organizing forms of the selling channel and the various selling behavior.

本论文所研究的是分销渠道中的节税设计，目的在于对分销渠道的不同组织形式、不同销售行为进行涉税分析，找出筹划点，作出节税设计。

Mutual effect of DeSO_2/ DeNO_x and removal of fly ash from simulated flue gas, which was made by combining SO_2 NO_x and fly ash with air, was studied by utilizing high voltage positive pulse corona produced by nanosecond pulse voltage generator.

采用SO2、NO和飞灰与空气混合而成的模拟烟气和纳秒级脉冲电源，研究高压正脉冲电晕脱硫脱硝和除尘之间的相互影响关系。

Through grinding experiments, the grinding performances of resin bond grinding wheels made with self-sharpening diamond ( CSD) was studied.

本文通过对比磨削试验，研究了自锐性金刚石（CSD）树脂砂轮的磨削性能。

The effect of wave crest coefficient on lamp lifetime is studied experimentally. Based on the study, an improved circuit is designed with the result of better performance of electronic ballast resistor.

由实验中测出不同的灯电流波峰系数与灯开关次数的对比结果，说明了灯电流波峰系数偏高对灯寿命的影响，从而推出一种高性能低成本的电子镇流器。