surface的例句大全

The Development of Hot Rolled Black Surface Beam Steel Plates for Automobiles

汽车大梁用热轧黑皮表面钢板的研制

As the liquid core rate increases, concave deformations increased on the top and bottom surface of a rolled metal;

在有液芯存在时，轧件的上下表面向内凹陷，侧面易于形成单鼓变形，并且随液芯率的增大而增大；

The abrasive mechanism of rolled white cast iron with various matrixes are studied by investigating the microstructure, abrasive surface and mechanical properties of specimens.

通过对不同基体组织轧制白口铁的金相组织、磨损表面和机械性能的分析，研究了具有不同基体组织轧制白口铁的磨损机理。

Numerical analysis of surface flaking in finish rolled lead frame copper alloy

引线框架铜合金精轧薄板表面起皮剥落的数值分析

A gale hit the 6th agricultural division on August 22, 2005.Based on several materials such as surface, high altitude and radar data, this paper analyzed and summarized the gale weather process, then got some conclusions that will be referred to gale forecast and warning.

利用地面、高空及云图、雷达资料对2005年8月22日晚一场袭击农六师各地的大风天气过程进行了分析总结，并得出一些对临近预报有意义的结论。

Under not obvious increasing the project investment circumstances, volume method for bituminous mixture is obvious to increase the mechanics performance and the surface function as a wearing course.

按体积比设计沥青混合料的方法可以在不明显提高造价的前提下，较传统技术显著提高沥青路面的力学性能和表面功能。

The process of solid boronizing and laser surface treatment is applied to get boron eutectic layer to lower sample's crisp property and improve its wearing quality.

采用渗硼+激光处理的复合处理工艺，使工件表层得到共晶型硼化物以期降低渗硼层脆性，提高其耐磨性。

The critical micelle concentration ( CMC) of surfactant in low-temperature dyeing assistant CWL was measured with the method of surface tension.

用表面张力法测试了自制低温染色助剂CWL中表面活性剂的临界胶束质量浓度（CMC）。

Ordered structure formed by carbon and oxygen on the mo ( 110) surface

碳和氧在钼（110）表面上形成的有序结构

The site of CO adsorbed on Cu { 00l} c ( 2 × 2)-Pd ordered surface alloy has been studies using high resolution electron energy loss spectroscopy ( HREELS). CO molecules are bonded vertically only on top sites of Pd atoms at 240K.

用高分辨电子能量损失谱研究CO在有序表面合金Cu{001}c（2×2）-Pd上的吸附位置，在240K，CO仅直立地吸附在Pd原子的顶位；

Adsorption of CO on cu { 001} c ( 2 × 2)-pd ordered surface alloy

CO在表面有序合金Cu{001}c（2×2）-Pd上的吸附

Study on Oxidation and CO Adsorption on Rh ( 100) c ( 2 × 2) Mn Ordered Alloy Surface

Rh（100）c（2×2）Mn表面合金的氧化和吸附CO的研究

CO adsorption and coadsorption with O2 on ordered alloy surface Pd { 001} c ( 2 × 2)-Mn were studied with high-resolution electron energy loss spectroscopy ( HREELS) and low energy electron diffraction ( LEED).

用高分辨率电子能量损失谱研究了O2和CO在有序合金表面Pd{θ01}c（2×2）-Ma上的共吸附。

Quasi-longitudinal leaky surface acoustic wave on Y-rotated cut ST-quartz substrates

Y旋转ST-石英基片上的准纵漏表面声波

Conditions for No Soil Push by Outside of Front Cutting Surface on Plane Curved Blade

平面型弯刀正切面外侧不推土条件

Experimental investigation of surface static pressure in curved blade compressor cascade at different incidences

不同冲角下弯叶片扩压叶栅壁面静压的实验研究

Part of the crack is cut by drill, the crack surface is dust-colour under naked eyes.

钻孔截取裂纹局部，肉眼可见裂纹表面呈暗褐色。

Study on the Failure and Surface Strengthening of the Cutter Blade

化纤切断刀的失效与强化研究

A theoretical analysis is made of the transmission characteristics of the cyclic surface temperature variations in the cylinder head.

从理论上分析了周期性温度波在缸盖内的传播特性。

Study of straight and curved surface intersection principle, generating root cleaning cutter locus of points. 2.

研究直线与曲面求交原理，生成清根刀心点的轨迹。2.后置处理与加工仿真。