surfacing的例句大全

Wear tests of 45 steel, as standard sample, and D8 、 D9 wear-resisting surfacing materials were carried out by sand slurry abrasion tester with vertical multi-clamps under concrete condition.

在多头立式磨损试验机上，以45钢（正火态）作为标准试样，选用D8、D9两种耐磨堆焊材料，在混凝土工况条件下进行了磨损试验。

The formation and microstructure of intermetallic surfacing layers acquired by light beam heating Ni and Al mixed powder were investigated by means of X-ray diffraction, SEM, EDXS and microhardness.

采用X射线衍射、SEM、EDXS及显微硬度等方法，研究了光束堆焊Ni，Al混合粉末制备的金属间化合物涂层的成形和微观组织特征。

The basic technology of computer controlled optical surfacing ( CCOS) is introduced.

介绍了计算机控制光学表面成型技术的原理基础，目前的进展及其将来的趋势。

Such as slurry seal, Polymer modification emulsified bitumen slurry seal layer technology ( Micro-Surfacing technology), through early conservation, and to effectively improve and enhance the technology of the road conditions postponed and extended the overhaul period, achieving very good results.

如稀浆封层、聚合物改性乳化沥青稀浆封层（即微表处）技术，通过及早养护，有效改善和提高了路面的技术状况，推迟和延长了大修期，收到了很好的效果。

Niekle-based composite alloy powders were deposited on the Surface of Q 235 steel by plasma-arc surfacing.

采用等离子弧堆焊技术,在Q235钢表面堆焊镍基复合粉末.

For surfacing welding the axle, steam valve blade of mixer and spiral carrying.

用于堆焊碳钢或合金钢的轴 、 过热蒸气阀们、搅拌机桨、螺旋输送机叶片的堆焊.

Aviation buffs are buzzing over blurry photographs now surfacing on Chinese military websites purporting to show Beijing's first stealth fighter jet, the Chengdu J-20 fighter.

航空迷们正对着中国军事网上几张模糊的照片窃窃私语，声称是北京的第一架隐形战斗机，成飞制造的J-20。

The existing Computer Controlled Optical Surfacing ( CCOS), i.e., linear and shift invariant system, is analyzed. This is a linear model.

分析了现有计算机数控光学表面成形CCOS的控制模型，即线性移不变系统。

Argon arc welding of copper alloys and surfacing of steel.

铜合金氩弧焊及钢的堆焊用。

Yesterday, has been basically completed in the Olympic park hockey field, the people started surfacing competition with artificial turf for the upcoming "good luck beijing" prepare for the race.

昨天，在已基本完工的奥林匹克公园曲棍球场里，工人们开始铺装比赛用人工草皮，为即将举行的“好运北京”赛事做准备。

Studies were made for the effect of alloy composition and water atomisation on high chromium iron powder for plasma transferred arc surfacing.

本文对等离子喷焊用高铬铸铁粉末的合金成分和水雾化制粉工艺进行探讨。

On the comparison of different design methods of asphalt emulsion content, general design method in China Micro-Surfacing construction was discussed.

通过对乳化沥青用量不同设计方法的比较，探讨中国普遍采用的设计方法在施工中的应用。

A new type of maraging steel metal powder cored wire for die TIG surfacing is developed.

研制了一种用于TIG模具堆焊的马氏体时效钢金属粉芯焊丝.

Only a twinkling an eye, an answer surfacing.

只是刹那间, 一个答案浮现眼前.

Feelings she thought she'd submerged were surfacing again.

她以为已经抑制住的情感再一次涌上心头。

For short-run version to surfacing, left edge lines, 2, smooth, non-pitting and Burr.

对于烫印版,要求其表面平整、图文线条清晰 、 边沿光洁 、 无麻点和毛刺.

Plasma-arc welding ( PAW ) may be used for hard surfacing, overlaying and fully automatic butt welding.

等离子弧焊可用于敷焊硬合金表面、堆焊和全自动对接焊.

Stripe shader on scan data immediately highlight areas of problematic surfacing and unresolved design problems.

条纹着色对扫描数据立即领域的突出问题的堆焊和未解决的设计问题.

For surfacing welding the out parts of gear, digger, scrape board of tractor, mine mechanic etc.

用于堆焊齿轮 、 挖泥斗 、 拖拉机刮板 、 矿山机械等磨损件.

The results show that the structure of the surfacing layer was martensite, carbides and residual austenite.

试验结果表明:焊后的堆焊层组织为马氏体+碳化物+残余奥氏体.