thermocouple的例句大全

The ambient temperature shall be measured by means of a thermocouple.

灯具工作现场的温度应当采取热电偶的方式来测.

They should be checked frequently against a standard thermocouple.

它们经常要用标准热电偶来校对.

When a kiln rotates, the thermocouple periodically contacts feed solids materials.

因窑炉转动 、 物料和热电偶周期接触,引起测量温度周期性变化.

The simplest version of the thermocouple gage consists of a resistance wire.

最简单的热电偶真空计是由电阻丝组成.

The thermocouple junction relative to the specimen's surface was hence under control.

热电偶交界相对试样的表面热电偶,因此受到控制.

Input. Determine inputs, such as thermocouple signals, timer, or analytical test results.

输入. 确定输入, 比如热电偶信号, 定时器, 或分析测试结果.

Reference junction compensation is required for thermocouple measurement with voltmeters.

参考交界补偿所需的热电偶测量电压表.

The transmitter is wired for up-scale thermocouple burn-out protection.

变送器上壳连有热电偶烧毁保护接线.

The temperature is sensed by a thermocouple located in the vapour space.

该温度由位于蒸气空间的热电偶所测出.

A thermocouple made of platinum / platinumrhodium provides the accurate temperature sensing.

由铂或铂铑组成的热电偶给出精确的温度指示.

A double-membranous Surface thermocouple used in ceramic materials has been developed.

针对陶瓷材料的特点,研制了一种双薄膜式表面热电偶.

Temperature-measuring thermocouple. Type of heating element and polarity symbols can be specified.

温度测量热电偶. 可指定加热单元和极性符号的类型.

Thermocouple hole outlet, outlet and a good location Hough mouth.

把热电偶孔进风口, 出风口和哈夫口定位好.

Generally the thermocouple emf will be measured using a digital voltmeter.

一般来说,热电偶电动势将成为衡量使用数字电压表.

The results were coincident withthe. calculated data and the thermocouple measurements.

测得的刀具表面温度与理论结果及热电偶方法所得结果相符合.

Software Design for Fully Automatic Thermocouple Test System Used by Microcomputer Control

采用微机控制的全自动热电偶检定系统的软件设计

Several protective devices adopted : alarm for open circuit of thermocouple, alarm for overheat and overloading protect.

设有热电偶断偶报警 、 高温报警、过载保护多种安全保护.

Adopted sensitive micro-K thermocouple detector provides quick and accurate temperature measurement of a tip.

采用敏感的微型K热电偶传感器,准确快捷测量焊咀温度.

In hardware design, both the quenchant's cooling characteristic and the ambient temperature are acquired to actualize thermocouple cold junction compensation ( CJC).

硬件设计上，用两通道数据采集分别采集淬火介质温度和环境温度，实现对K型热电偶动态冷端补偿；

In the following experiment a candle flame in three characteristic areas a thermocouple.

用高温探头在三个不同的火焰区域测定火焰的温度.