valve的例句大全

PROPORTIONAL CHARGE-OVER VALVE AND ITS APPLICATION TO φ140 SEAMLESS STEEL TUBE ROLLING MILL ( concluded )

换向-比例阀及其在φ140无缝钢管厂的应用 ( 续完 )

Valve opens when control switch is open and closes when control switch closed.

当控制开关开启时阀门开启,而当控制开关关闭时阀门关闭.

Valve opens when control switch is open 5-seconds and closes when control switch is closed 5-seconds.

当控制开关开启5秒钟时阀门就开启,而当控制开关关闭5秒钟时阀门就关闭.

Analyses the relation between cooling ( heating ) quantity and rate, and the adjustable range of straight-through valve.

分析了盘管冷 ( 热 ) 量与水量的关系以及直通调节阀的可调范围.

Maintenance: Both cylinder bore and cylinder head valve guide tube can be repaired by resisting.

大修：缸孔可采用镶缸套形式重修，缸盖气阀导管也可采用镶套形式重修。

Anesthesia for the patients undergoing combined valve and coronary artery bypass surgery

冠状动脉搭桥术合并瓣膜手术的麻醉

GSF-80 high speed electromagnetic valve

GSF&80型高速电磁阀

The Principal, Character and Specification of GFH optic fiber valve position put forward by application of Optic Fiber sensing technology is introduced.

介绍了运用光纤传感技术研制的光纤阀位回讯器的工作原理、特点及技术性能。

Fatigue lifetime of valve springs contains two parts: lifetime crack initiation and another for crack propagation.

疲劳寿命一般包括疲劳裂纹萌生寿命和裂纹扩展寿命两部分.

Effect of FGE Valve on Mechanical Ventilation, Circuit Anesthetic Concentration and Gas Volume

隔离阀对稳定机械通气、回路内药物浓度和气体量的意义

Following the heating section of the HTST system, the product reaches a flow diversion valve ( FDV).

经过HTST设备的这个加热段以后，产品到达流量转向阀（FDV）。

Remove the body bolts from the valve body.

从阀体上拆卸阀体螺栓.

IMPORTANT ! Flow must always be in direction of arrow on valve body.

重要提示! 水流流向必须与阀体上的箭头方向一致.

Turn handle to be perfectly perpendicular to valve body.

将手柄旋转到与阀体完全垂直的位置.

Screw the cover onto the valve body.

将阀盖旋在阀体上.

Fork Lift , Valve, Body Coupling, Bracket.

供应阀门,叉车起重机, 耦合器, 插座等.

Electric heat-tape wrap closely together around valve body.

电热交叉缠绕水布紧密地环绕阀体.

Screw cover onto valve body.

用螺丝将阀盖固定在阀体上.

Remove drain plug and install valve assembly.

拆卸排泄塞,并且安装阀门总成.

Use for hydraulic and pneumatic valve assembly in fluid power systems.

用于流体动力系统中的气动和液压阀组件.